Polycom RMX 1500 Administrator's Manual page 492

14-54
6
Click Next.
The Span Definition dialog box is displayed:
Table 14-22 Span Definition
Field
Framing
Side
Description
Select the Framing format used by the carrier for
the network interface from the list.
• For T1 spans, default is SFSF.
•
For E1 spans, default is FEBE.
Select one of the following options:
•
User side (default)
• Network side
•
Symmetric side
Note: If the PBX is configured on the network side,
then the RMX unit must be configured as the user
side, and vice versa, or both must be configured
symmetrically.
Chapter 14-Network Services