Polycom RMX 1500 Administrator's Manual page 573

7
Select the location where the format will reside, enter a name and
then click OK.
The system returns to the Sound Selection dialog box.
8 Click OK.
The system returns to the Properties for Sound dialog box.
9
Click OK.
The system returns to the Sound–Sound Recorder dialog box. You are
now ready to record your voice message.
To record a new audio message:
Regardless of the recording utility you are using, verify that any new audio
message recorded adheres to the following format settings: 16.000kHz, 16Bit,
Mono.
Make sure that a microphone or a sound input device is connected to
your PC.
1
On your PC, click Start > Programs > Accessories > Entertainment >
Sound Recorder.
The Sound–Sound Recorder dialog box opens.
2 Click File > New.
3
Click the Record button.
The system starts recording.
4 Start narrating the desired message.
For all audio IVR messages, stop the recording anytime up to 3 minutes (which
is the maximum duration allowed for an IVR voice message). If the message
exceeds 3 minutes it will be rejected by the RMX unit.
5
Click the Stop Recording button.
6
Save the recorded message as a wave file, click File > Save As.
Polycom RMX 1500/2000/4000 Administrator's Guide
15-41