Polycom RMX 1500 Administrator's Manual page 470

14-32
2
Modify the following field:
Table 14-13 Ethernet Settings Parameters
Field
Speed The RMX has 3 LAN ports on the RTM-IP (Management,
Signaling and Shelf Management), and additional LAN ports
on each media card (RTM LAN) and RTM ISDN cards. The
administrator can set the speed and transmit/receive mode
manually for these ports.
Port
Speed
3
Click the OK button.
Description
The LAN port number.
Note: Do not change the automatic setting of
Port 1,4 and Port 5 of the Management 2 and
Signaling 2 Networks. Any change to the speed
of these ports will not be applied.
Select the speed and transmit/receive mode for
each port.
Default: Auto – Negotiation of speed and
transmit/receive mode starts at 1000 Mbits/
second Full Duplex, proceeding downward to 10
Mbits/second Half Duplex.
Note: To maximize conferencing performance,
especially in high bit rate call environments, a
1Gb connection is recommended.
Note:
RMX4000: Do not select 1000 Full Duplex for
any LAN ports in Slot 17.
Select only 100 Full Duplex.
RMX1500: Do not select 1000 Full Duplex for
Port 5 (ShM).
Select only 100 Full Duplex.
Chapter 14-Network Services