Polycom RMX 1500 Administrator's Manual page 823

Table 20-14 MCU Properties - Event Log (Continued)
Column
Status
Ipmb Address(hex)
3
Click the Active Alarms tab to view alarms related to the RMX, i.e.
temperatures and main power sensors.
The Active Alarms dialog box displays fields that relate to faults and
errors detected on the RMX by sensors. The Active Alarms dialog box
is divided into two sections: HW Alarm List and SW Alarm List.
Each section's alarm list can be saved as a *.xls file by clicking the
Save HW Alarm List and Save SW Alarm List buttons respectively.
Each alarm list color codes the severity of the alarm; Critical (RED),
Major (ORANGE) and Normal (GREEN).
If you connected to the Hardware Monitoring via the Shelf Management server,
the SW Alarm List section will not be displayed.
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
The sensor's active status.
Contains all the internal IPMI network addresses on
the IPMB bus, i.e. 0x20 (Switch), 0x86 (MFA), etc...
20-25