Polycom RMX 1500 Administrator's Manual page 909

Table C-11 Event fields for Event 5 - ISDN/PSTN PARTICIPANT
CONNECTED (Continued)
Field
Participant Status
Remote
Capabilities
Remote
Communication
Mode
Secondary Cause
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
The participant status, as follows:

0 - Idle

1 - Connected
2 - Disconnected
3 - Waiting for dial-in

4 - Connecting
5 - Disconnecting
6 - Partially connected. Party has completed H.221
capability exchange
7 - Deleted by a user

8 - Secondary. The participant could not connect the
video channels and is connected via audio only
10 - Connected with problem
11 - Redialing
Note: This field is only relevant to ISDN video
participants.
The remote capabilities in H.221 format.
Note: This field is only relevant to ISDN video
participants.
The remote communication mode in H.221 format.
Note: This field is only relevant to ISDN video
participants and only if the Participant Status is
Secondary.
The cause for the secondary connection (not being able
to connect the video channels), as follows:
0 - Default
11 - The incoming video parameters are not compatible
with the conference video parameters
12 - H.323 card failure
13 - The conference video settings are not compatible
with the endpoint capabilities
14 - The new conference settings are not compatible
with the endpoint capabilities
C-27