Polycom RMX 1500 Administrator's Manual page 690

Chapter 19-RMX Administration and Utilities
19-26
Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
ENABLE_H239_ANNEX
_T=YES
ENABLE_IP_REDIAL
ENABLE_EPC
ENABLE_TEXTUAL
_CONFERENCE
_STATUS=YES
FORCE_1X1_LAYOUT
_ON_CASCADED_LINK
_CONNECTION
Description
In H.239-enabled MIH Cascading, when MGC
is on level 1, enables sending Content using
Annex T.
When set to YES, enables re-dialing if H.323
or SIP dial out calls fail.
This flag sets the initial value for Auto
Redialing during First-time Power-up.
Thereafter the feature is controlled via the
New Profile/Profile Properties - Advanced
dialog box.
Default: YES.
When set to YES (default), enables Polycom
proprietary People+Content.
When set to NO, disables this feature for all
conferences and participants.
Set the value of this flag to NO to disable Text
Indication. This setting is recommended for
MCUs running Telepresence conferences.
Default: YES.
When set to YES, the cascaded link is
automatically set to Full Screen (1x1) in CP
conferences forcing the speaker in one
cascaded conference to display in full window
in the video layout of the other conference.
Set this flag to NO when connecting to an
MGC using a cascaded link, if the MGC is
functioning as a Gateway and participant
layouts on the other network are not to be
forced to 1X1.
Default: YES