Polycom RMX 1500 Administrator's Manual page 805

Hide thumbs Also See for RMX 1500:

Table of Contents

Click the Active Alarms tab to view alarms related to the RMX, i.e.

temperatures and main power sensors.

The Active Alarms dialog box displays fields that relate to faults and

errors detected on the RMX by sensors. The Active Alarms dialog box

is divided into two sections: HW Alarm List and SW Alarm List.

Each section's alarm list can be saved as a *.xls file by clicking the

Save HW Alarm List and Save SW Alarm List buttons respectively.

Each alarm list color codes the severity of the alarm; Critical (RED),

Major (ORANGE) and Normal (GREEN).

If you connected to the Hardware Monitoring via the Shelf Management server,

the SW Alarm List section will not be displayed.

To view the Card Properties:

In the Hardware Monitor pane, either double-click or right-click and

select properties for the desired hardware component.

The following information is displayed:

Card Properties - General Info

Polycom RMX 1500/2000/4000 Administrator's Guide

The hardware component's version number.

The version number of the software installed on

Troubleshooting

Rmx 4000 Rmx 2000