Polycom RMX 1500 Administrator's Manual page 367

Table 11-1 Conference Properties - General (Continued)
Field
Video Switching
Reserve
Resources for
Video Participants
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
When selected, the conference is of ultra-high quality
video resolution, in a special conferencing mode
which implies that all participants must connect at the
same line rate and use HD video.
This feature utilizes the resources more wisely and
efficiently by:
•
Saving utilization of video ports (1 port per
participant as opposed to 4 ports in CP mode).
•
Video display is in full screen mode only.
Drawbacks of this feature are that all participants
must connect at the same line rate, (e.g. HD) and all
participants with endpoints not supporting HD will
connect as secondary (audio only).
Video layout changes are not enabled during a
conference.
Video Switching supports the following resolutions:
•
MPM:
• HD 720P
•
MPM+:
•
HD 1080p
• MPMx:
•
1080p30
•
720p30
•
720p60
• SD30
If HD 1080p is selected, endpoints that do not support
HD 1080p resolution are connected as Secondary
(Audio Only) participants.
Note: Video Switching conferencing mode is
unavailable to ISDN participants.
For more information, see "Video Resolutions in CP"
on page 2-4.
Displays the number of video participants for which
the system reserved resources.
Default: 0 participants.
11-5