Polycom RMX 1500 Administrator's Manual page 838

Chapter 20-RMX Hardware Monitoring
20-40
The MPM+/MPMx cards indicate "Resetting" and later switch to
"Diagnostics". The status of RTM-IP/RTM IP 1500/RTM-IP 4000 and
CNTL/CNTL 1500/CNTL 4000 components change to
"Diagnostics".
RMX 2000/4000 &
RMX 1500 Hardware
Monitor panes
4
You can select any one of the Hardware components indicating
"Diagnostics/Normal" in the status column and right-click
Properties from the menu. The card's General Info/Event Log/Active
Alarms properties are displayed.
You can view Diagnostic Tests & Tests Monitoring by clicking the
Advanced Diagnostics Tab.
When you click the Advanced Mode the RMX enters a "Diagnostics Mode".
The Advanced Mode can be exited by pressing the yellow System Reset icon.
The RMX then resets.