Polycom RMX 1500 Administrator's Manual page 671

Table 19-2 System Flags – MCMS_PARAMETERS (Continued)
Flag
ALLOW_NON_ENCRYPT
_RECORDING_LINK_IN_
ENCRYPT_CONF
APACHE_KEEP
_ALIVE
_TIMEOUT
AUTHENTICATE_USER
AVOID_VIDEO
_LOOP_BACK_IN
_CASCADE
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
When set to NO (default), the Recording Link
inherits the encryption settings of the
conference. If the conference is encrypted,
the recording link will be encrypted.
When set to YES, it disables the encryption
of the recording link, regardless of the
Encryption settings of the conference and
RSS recorder.
If the connection is idle for longer than the
number of seconds specified by this flag, the
connection to the RMX is terminated.
Value: 0 - 999
Default: 120
Default (JITC_MODE=YES): 15
Note: A value of 0 results in an unlimited
keep-alive duration. This value should never
be used in Ultra Secure Mode.
If the external database application is to be
used to verify that operators are authorized to
log in to the MCU, set the value of this flag to
YES.
If the value of this flag is set to NO, the MCU
database is used to verify that operators are
authorized to log in to the MCU.
Note: If the flag is set to YES, the flow is first
to look in the internal DB and then go out to
the external one.
Flags for SE200 need to be added manually.
When set to YES the current speaker's
image is not sent back through the participant
link in cascaded conferences with conference
layouts other than 1x1.
Default: YES
Range: YES / NO
19-7