Ip Network Services - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

IP Network Services

Management Network (Primary)

Two IP Services are defined for the RMX:

Management Network

Default IP Service (Conferencing Service)

Dial in, dial out connections and RMX management are supported within

the following IP addressing environments:

When IPv4 is selected, IPv6 fields are not displayed and conversely when

IPv6 is selected, IPv4 fields are not displayed. When IPv6 & IPv4 is

selected both IPv6 and IPv4 fields are displayed.

For the purposes of comprehensive documentation, all screen captures in

this chapter show the dialog boxes as displayed with IPv6 & IPv4 selected.

For more information see "Using IPv6 Networking Addresses for RMX

Internal and External Entities" on page 14-39.

The Management Network is used to control the RMX, mainly via the RMX

Web Client application. The Management Network contains the network

parameters, such as the IP address of the Control Unit, needed for

connection between the RMX and the RMX Web Client. This IP address

can be used by the administrator or service personnel to connect to the

Control Unit should the RMX become corrupted or inaccessible.

During First Time Power-up, the Management Network parameters can be

set either via a USB key or by using a cable to create a private network.

For more information, see the RMX 1500/2000/4000 Getting Started Guide,

"Modifying the Factory Default Management Network Settings on the USB

Key" on page

and Appendix G of this manual, "Configuring Direct

Connections to RMX" on page G-1.

Chapter 14-Network Services

Rmx 4000 Rmx 2000