Appendix G-Configuring Direct Connections to RMX
G-16
Procedure 4: Connect to the RMX
To Connect using the RMX Manager:
To use the browser:
In the browser's command line, enter
IP Address>/RmxManager.html
To use the Windows Start menu:
1
Click Start.
a
If the RMX Manager is displayed in the recently used programs
list, click RMX Manager in the list to start the application.
or
b
Click All Programs.
The All Programs list is displayed.
a
Select Polycom and then select RMX Manager.
The RMX Manager – Welcome screen is displayed.
http://<MCU Control Unit
and press Enter.