Polycom RMX 1500 Administrator's Manual page 238

Chapter 5-Entry Queues, Ad Hoc Conferences and SIP Factories
5-6
Table 5-2: Entry Queue Definitions Parameters (Continued)
Option Description
Display Name
•
(cont.)
•
The maximum length of text fields also varies
according to the mixture of character sets (Unicode
and ASCII).
Maximum field length in ASCII is 80 characters. If the
same name is already used by another conference,
Meeting Room or Entry Queue, the RMX displays an
error message requesting you to enter a different
name.
Routing Name Enter a name using ASCII text only. If no Routing
Name is entered, the system automatically assigns a
new name as follows:
•
•
Profile Select the Profile to be used by the Entry Queue. The
default Profile is selected by default. This Profile
determines the Bit Rate and the video properties with
which participants connect to the Entry Queue and
destination conference.
In Ad Hoc conferencing it is used to define the new
conference properties.
ID Enter a unique number identifying this conferencing
entity for dial in. Default string length is 4 digits.
If you do not manually assign the ID, the MCU assigns
one after the completion of the definition. The ID String
Length is defined by the flag
NUMERIC_CONF_ID_LEN in the System
Configuration.
European and Latin text length is approximately
half the length of the maximum.
Asian text length is approximately one third of the
length of the maximum.
If an all ASCII text is entered in Display Name, it is
used also as the Routing Name.
If any combination of Unicode and ASCII text (or
full Unicode text) is entered in Display Name, the
ID (such as Conference ID) is used as the Routing
Name.