Polycom RMX 1500 Administrator's Manual page 676

Chapter 19-RMX Administration and Utilities
19-12
Table 19-2 System Flags – MCMS_PARAMETERS (Continued)
Flag
HD_THRESHOLD_
BITRATE
HIDE
_CONFERENCE
_PASSWORD
HIDE_SITE_NAMES
ISDN_COUNTRY_ CODE
ISDN_IDLE_CODE_E1
Description
Sets the minimum bit rate required by
endpoints to connect to an HD Conference.
Endpoints that cannot support this bit rate are
connected as audio only.
Range: 384kbps - 4Mbs (Default: 768)
If set to YES: (default in Ultra Secure Mode):
•
Conference and Chairperson Passwords
that are displayed in the RMX Web Client
or RMX Manager are hidden when
viewing the properties of the conference.
•
Automatic generation of passwords (both
conference and chairperson passwords)
is disabled, regardless of the settings of
the flags:
•
NUMERIC_CONF_PASS_DEFAULT
_LEN
•
NUMERIC_CHAIR_PASS_ DEFAULT
_LEN.
For more information see "Automatic
Password Generation Flags" on page
Default: NO.
Set this flag to ON to cancel the display of
site names. When set to ON and the display
is disabled, the flag
SITE_NAMES_ALWAYS_ON =YES is
ignored.
Default: OFF
The name of the country in which the MCU is
located.
Default: COUNTRY_NIL
The Idle code (silent), transmitted on the
ISDN E1 B channels, when there is no
transmission on the channels.
Default: 0x54
19-47