Defining The Snmp Parameters In The Rmx - Polycom RMX 1500 Administrator's Manual

Chapter 19-RMX Administration and Utilities

Defining the SNMP Parameters in the RMX

19-90
The SNMP option is enabled via the RMX Web Client application.
The addresses of the Managers monitoring the MCU and other security
information are defined in the RMX Web Client application and are saved
on the MCU's hard disk. Only users defined as Administrator can define
or modify the SNMP security parameters in the RMX Web Client
application.
To enable SNMP option:
1
In the RMX Web Client menu bar, click Setup > SNMP.
The RMX-SNMP Properties - Agent dialog box is displayed.
This dialog box is used to define the basic information for this MCU
that will be used by the SNMP system to identify it.
2
In the Agent dialog box, click the SNMP Enabled check box.
3 Click the Retrieve MIB Files button to obtain a file that lists the MIBs
that define the properties of the object being managed.
The Retrieve MIB Files dialog box is displayed.