Traps - Polycom RMX 1500 Administrator's Manual

Chapter 19-RMX Administration and Utilities

Traps

19-88
Three types of traps are sent as follows:
1
ColdStart trap. This is a standard trap which is sent when the MCU is
reset.
coldStart notification received from: 172.22.189.154 at 5/20/
2007 7:03:12 PM
Time stamp: 0 days 00h:00m:00s.00th
Agent address: 172.22.189.154 Port: 32774 Transport: IP/UDP
Protocol: SNMPv2c Notification
Manager address: 172.22.172.34 Port: 162 Transport: IP/UDP
Community: public
Enterprise: enterprises.8072.3.2.10
Bindings (3)
Binding #1: sysUpTime.0 *** (timeticks) 0 days
00h:00m:00s.00th
Binding #2: snmpTrapOID.0 *** (oid) coldStart
Binding #3: snmpTrapEnterprise.0 *** (oid)
enterprises.8072.3.2.10
Figure 1 An Example of a ColdStart Trap
2
Authentication failure trap. This is a standard trap which is sent
when an unauthorized community tries to enter.
authentication Failure notification received from:
172.22.189.154 at 5/20/2007 7:33:38 PM
Time stamp: 0 days 00h:30m:27s.64th
Agent address: 172.22.189.154 Port: 32777 Transport: IP/UDP
Protocol: SNMPv2c Notification
Manager address: 172.22.172.34 Port: 162 Transport: IP/UDP
Community: public
Enterprise: enterprises.8072.3.2.10
Bindings (3)
Binding #1: sysUpTime.0 *** (timeticks) 0 days
00h:30m:27s.64th
Binding #2: snmpTrapOID.0 *** (oid) authenticationFailure
Binding #3: snmpTrapEnterprise.0 *** (oid)
enterprises.8072.3.2.10
Figure 2 An Example of an Authentication Failure Trap