Polycom RMX 1500 Administrator's Manual page 316

Chapter 8-Operator Assistance & Participant Move
8-18
3
Define the following parameters:
Table 8-4 New Conference – General Options
Field
Duration
Routing Name
ID
Conference
Password
Description
Define the duration of the conference in hours using
the format HH:MM (default 01:00).
Notes:
•
The Operator conference is automatically
extended up to a maximum of 168 hours.
Therefore, the default duration can be used.
•
This field is displayed in all tabs.
Routing Name is the name with which ongoing
conferences, Meeting Rooms, Entry Queues and
SIP Factories register with various devices on the
network such as gatekeepers and SIP server. This
name must defined using ASCII characters.
Comma, colon and semicolon characters cannot
be used in the Routing Name.
The Routing Name can be defined by the user or
automatically generated by the system if no Routing
Name is entered as follows:
•
If ASCII characters are entered as the Display
Name, it is used also as the Routing Name
•
If a combination of Unicode and ASCII
characters (or full Unicode text) is entered as the
Display Name, the ID (such as Conference ID) is
used as the Routing Name.
If the same name is already used by another
conference, Meeting Room or Entry Queue, the
RMX displays an error message and requests that
you to enter a different name.
Enter the unique-per-MCU conference ID. If left
blank, the MCU automatically assigns a number
once the conference is launched.
This ID must be communicated to conference
participants to enable them to dial in to the
conference.
Leave this field empty when defining an Operator
conference.