Polycom RMX 1500 Administrator's Manual page 489

3
Define the following parameters:
Table 14-20 ISDN Service Settings
Field
Network Service
Name
Span Type
Service Type
4 Click Next.
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Specify the service provider's (carrier) name or any
other name you choose, using up to 20 characters.
The Network Service Name identifies the ISDN/PSTN
Service to the system.
Default name: ISDN/PSTN Service
Note: This field is displayed in all ISDN/PSTN
Network Properties tabs and can contain character
sets that use Unicode encoding.
Select the type of spans (ISDN/PSTN) lines, supplied
by the service provider, that are connected to the
RMX. Each span can be defined as a separate
Network Service, or all the spans from the same
carrier can be defined as part of the same Network
Service.
Select either:
•
T1 (U.S. – 23 B channels + 1 D channel)
•
E1 (Europe – 30 B channels + 1 D channel)
Default: T1
PRI is the only supported service type. It is
automatically selected.
14-51