Polycom RMX 1500 Administrator's Manual page 465

Table 14-9 Default IP Network Service – SIP Servers (Continued)
Field
Server Domain
Name
Port
Outbound Proxy Servers: Primary / Alternate Server Parameter
Server IP Address
Port
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Enter the name of the domain that you are using for
conferences, for example:
user_name@domain name
The domain name is used for identifying the SIP
server in the appropriate domain according to the
host part in the dialed string.
For example, when a call to EQ1@polycom.com
reaches its outbound proxy, this proxy looks for the
SIP server in the polycom.com domain, to which it
will forward the call.
When this call arrives at the SIP server in
polycom.com, the server looks for the registered
user (EQ1) and forwards the call to this Entry Queue
or conference.
Enter the number of the TCP or UDP port used for
listening. The port number must match the port
number configured in the SIP server.
Default port is 5060.
By default, the Outbound Proxy Server is the same
as the SIP Server. If they differ, modify the IP
address of the Outbound Proxy and the listening
port number (if required).
Note: When in IPv4&IPv6 or in IPv6 mode, it is
easier to use Names instead of IP Addresses.
Enter the port number the outbound proxy is
listening to.
The default port is 5060.
14-27