Installing The Rmx Manager - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Chapter 18-RMX Manager Application

Installing the RMX Manager

The RMX Manager application can be downloaded from one of the RMX

systems installed in your site or from Polycom web site at

http://www.polycom.com/support.

To install RMX Manager (downloading the application from the RMX):

Upgrade Notes

When upgrading the RMX Manager application, it is recommended to

backup the MCU list using the Export RMX Manager Configuration option.

For more details, see "Import/Export RMX Manager Configuration" on

When upgrading the RMX Manager from a major version (for example, version

7.0) to a maintenance version of that version (for example, 7.0.x), the installation

must be performed from the same MCU (IP address) from which the major

version (for example, version 7.0) was installed.

If you are upgrading from another MCU (different IP address), you must first

uninstall the RMX Manager application using Control Panel > Add or Remove

New RMX Installation Note

The RMX Installation and First Entry Configuration must be completed before

installing the RMX Manager application. For more details, see the RMX 1500/

2000/4000 Getting Started Guide, Chapter 2, First Time Installation and

Configuration.

Once the connection to the RMX unit is established and the Login window is

displayed, the RMX Manager application can be installed.

Start Internet Explorer and connect to one of the RMX units in your

site. It is recommended to connect to the RMX installed with the latest

software version.

Rmx 4000 Rmx 2000