Conference Templates - Polycom RMX 1500 Administrator's Manual

Adding MCUs to the MCUs List

Conference Templates

Conference Templates enable administrators and operators to create, save,
schedule and activate identical conferences.
The Conference Templates pane lists the Conference Templates that have
been defined on the selected RMX.
The Conference Templates pane is initially displayed as a closed tab. The
name of the selected RMX and the number of saved Conference Templates is
indicated on the tab.
For more details, see the RMX 1500/2000/4000 Getting Started Guide,
"Conference Templates" on page 3-10.
The RMX Manager can connect to one or several RMX units
simultaneously. If the site's configuration includes more than one MCU,
or when a new MCU is added to your configuration, and you want to
monitor and control all MCUs from within the same window, you must
add the MCU to the MCUs list.
The RMX unit must be installed and its IP addresses properly configured in the
Management Network Service before defining its connection parameters in the
RMX Manager application.
To add the MCU to the list of MCUs being managed, define the MCU's
connection parameters.
To add an RMX unit:
1
On the MCUs toolbar, click the Add MCU
to the MCU list.
The Add MCU dialog box opens.
Polycom RMX 1500/2000/4000 Administrator's Guide
button to add an MCU
18-17