Automatic Dial String Generation - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Chapter 17-Gateway Calls

Automatic Dial String Generation

When prompted for the target conference ID, the caller enters the

string of the target meeting room on the DMA followed by the # key.

This string is composed of the DMA prefix as registered in the

gatekeeper and the ID of the virtual meeting room running on the

DMA. For example, if the DMA prefix is 25 and the target meeting

room ID is 8000 the participant enters 258000 followed by the # key.

The RMX creates a Gateway Session with two participants, the calling

participant and the link to the conference running on the DMA.

The administrator can now configure the Gateway Profile to automatically

generate and forward the dial string from the RMX Gateway Session to the

DMA in order to connect to the required DMA Meeting Room. When this

configuration option is selected, the participant does not need to interact

with the IVR Service.

Rmx 4000 Rmx 2000