Polycom RMX 1500 Administrator's Manual page 667

Table 19-1 Active Alarms Pane Columns (Continued)
Field
Category
Category (cont.)
Level
Code
Process Name
Description
For more information about the Active Alarms, see Appendix B:
"Alarms and Faults" on page B-1.
2
Click one of the following two buttons to view its report in the System
Alerts pane:
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Lists the type of error. The following categories may
be listed:
•
File – indicates a problem in one of the files
stored on the MCU's hard disk.
•
Card – indicates problems with a card.
•
Exception – indicates software errors.
•
General – indicates a general error.
•
Assert – indicates internal software errors that
are reported by the software program.
•
Startup – indicates errors that occurred during
system startup.
•
Unit – indicates problems with a unit.
•
MPL - indicates an error related to a Shelf
Management component (MPL component)
other than an MPM, RTM or switch board.
Indicates the severity of the problem, or the type of
event. There are three fault level indicators:
– Major Error
– System Message
– Startup Event
Indicates the problem, as indicated by the error
category.
Lists the type of functional process involved.
When applicable, displays a more detailed
explanation of the cause of the problem.
19-3