Polycom RMX 1500 Administrator's Manual page 189

To define a Dial-in Participant as the cascade link:
This participant is added to the ongoing conference on the Slave MCU.
1
In the Participants list, click the New Participant button(
The New Participant - General dialog box opens.
2
Define the following parameters:
Table 3-1 New Participant – Dial-out Cascade Link
Field
Display Name
Dialing Direction
Type
IP Address
Alias Name
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Enter the participant name
Select Dial-in.
Select H.323.
If a gatekeeper is used: This field is left empty.
If a gatekeeper is not used: Enter the IP address of
the Signaling Host of the MCU running the other
conference.
If a gatekeeper is used: Enter the Alias of the MCU
running the other (second) conference.
If a gatekeeper is not used: This field is left empty.
).
3-25