Polycom RMX 1500 Administrator's Manual page 677

Table 19-2 System Flags – MCMS_PARAMETERS (Continued)
Flag
ISDN_IDLE_CODE_T1
ISDN_NUM_OF DIGITS
IVR_ROLL_CALL_USE_
TONES_INSTEAD_OF
_VOICE
JITC_MODE
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
The Idle code (silent), transmitted on the
ISDN T1 B channels, when there is no
transmission on the channels.
Default: 0x13
When using ISDN Overlap sending dialing
mode, this field holds the number of digits to
be received by the MCU.
Default: 9
When set to YES, the system does not
playback the Roll Call names when
participants enter or exit the conference. If
the voice messages are replaced with tones
the system will play these tones instead.
The use of tones requires the uploading of
the appropriate tone files in *wav format and
replacing the Roll Call Joined and Roll Call
Left message files with the tone files in the
Conference IVR Service - Roll Call dialog
box.
When the flag is set to NO, Roll Call names
are announced when participants enter or
exit the conference.
Default: NO.
When set to YES enables the Ultra Secure
Mode. When enabled, affects the ranges and
defaults of the System Flags that control:
•
Network Security
•
User Management
•
Strong Passwords
• Login and Session Management
•
Cyclic File Systems alarms
Default: NO
For a list of flags affected when the Ultra
Secure Mode is enabled, see "JITC_MODE
System Flag" on page 19-38.
19-13