Starting A Conferencing Call From The Moc - Polycom RMX 1500 Administrator's Manual

Appendix H-Setting the RMX for Integration Into Microsoft Environment
Setting Simultaneous Numerical Dialing and Matched URI
Routing
H-28

Starting a Conferencing Call from the MOC

1
In the Office Communicator application, enter the number to dial, for
example, 113344. This number is composed of the RMX Prefix in the
Gatekeeper (for example, 11) and the Meeting Room ID, as defined
on the RMX (for example, 3344).
2 Click Call, and then click Other.
The call is routed to the Meeting Room on the RMX, and the caller
that initiated the call connects as the conference chairperson.
3 The MOC User can then add video to the call, by selecting Add Video
in the Office Communicator window.
You can simultaneously set up an RMX for both numerical and Matched
URI dialing. If you want to do this, follow these instructions:
1
Set the RMX as a trusted service (MediationServer) and a voice
gateway using the instructions in "Setting the Numerical Dialing
Method" on page H-15.