Polycom RMX 1500 Administrator's Manual page 691

Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
FORCE_CIF_PORT_
ALLOCATION
FORCE_RESOLUTION
FORCE_STATIC_MB_
ENCODING
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
Sets the MCU to allocate one CIF video
resource to an endpoint, regardless of the
resolution determined by the Conference
Profile parameters. You can specify the
endpoint types for which resource allocation
can be forced to CIF resource, enabling other
types of endpoints to use higher resolutions in
the same conference.
Enter the product type to which the CIF
resource should be allocated. Possible values
are:
•
CMA Desktop - for CMA desktop client
• VSX nnnn - where nnnn represents the
model number for example, VSX 8000.
Use this flag to specify IP (H.323 and SIP)
endpoint types that cannot receive wide
screen resolution and that were not
automatically identified as such by the RMX.
Possible values are endpoint types, each type
followed by a semicolon. For example, when
disabling Wide screen resolution in an HDX
endpoint enter the following string: HDX;
Note: Use this flag when the flag
SEND_WIDE_RES_TO_IP is set to YES.
This flag supports Tandberg MXP mode of
sending and receiving video by IP endpoint in
HD 720p resolution and Video Quality set to
Motion. This mode is not supported for ISDN
endpoints.
Default value: Tandberg MXP.
To disable this flag, enter NONE.
19-27