Polycom RMX 1500 Administrator's Manual page 694

Chapter 19-RMX Administration and Utilities
19-30
Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
IP_ENVIRONMENT
_LINK=NO
ISDN_RESOURCE
_POLICY=
LOAD_BALANCE
(ISDN)
ITP_CERTIFICATION
Description
In H.239-enabled MIH Cascading, when MGC
is on level 1, setting this flag to YES will adjust
the line rate of HD Video Switching
conferences run on the RMX 1500/2000/4000
from 1920Kbps to 18432, 100bits/sec to
match the actual rate of the IP Only HD Video
Switching conference running on the MGC.
Note: If the flag MIX_LINK_ENVIRONMENT
is set to NO, the IP_ENVIRONMENT_LINK
flag must be set to YES.
The flag value determines how the ISDN B-
channels within configured spans are
allocated.
The robustness of the ISDN network can be
improved by allocating channels evenly (load
balancing) among the spans, minimizing the
effect of channel loss resulting from the
malfunction of a single span.
Set the flag value to:
• LOAD_BALANCE to allocate channels
evenly among all configured spans.
•
FILL_FROM_FIRST_CONFIGURED_SPAN
To allocate all channels on the first
configured span before allocating
channels on other spans.
•
FILL_FROM_LAST_CONFIGURED_SPAN
To allocate all channels on the last
configured span before allocating
channels on other spans.
Default: LOAD_BALANCE
When set to NO (default), this flag disables
the telepresence features in the Conference
Profile.
Set the flag to YES to enable the telepresence
features in the Conference Profile (provided
that the appropriate License is installed).