Ethernet Settings - Polycom RMX 1500 Administrator's Manual

Ethernet Settings

The RMX 2000 is set to automatically identify the speed and transmit/
receive mode of each LAN ports located on the RTM LAN or RTM ISDN
cards that are added to the system. These port settings can be manually
configured if the specific switch requires it, via the Ethernet Settings as
for RMX 1500/4000. For more details, see RMX 1500/2000/4000
Administrator's Guide, "Ethernet Settings" on page 14-30.
RMX 1500: The Port numbers displayed in the dialog box do not reflect the
physical Port numbers as labeled on the RMX 1500 MCU.
Signaling Host IP Address and MCU Prefix in GK
Indications
The RMX Web Client displays the Signaling Host IP Address and MCU
Prefix in GK parameters as defined in the Default H.323 Network Service.
Video/Voice Port Configuration and Resolution
Configuration
These configurations are set for the system and are applied to all the
Network Services.
Conference Profile
Registration of conferencing entities such as ongoing conferences,
Meeting Rooms, Entry Queues, SIP Factories and Gateway Sessions with
SIP servers is done per conferencing entity. This allows better control on
the number of entities that register with each SIP server by selecting for
each of the conferencing entities whether it will register with the SIP
server.
Polycom RMX 1500/2000/4000 Administrator's Guide
14-83