Polycom RMX 1500 Administrator's Manual page 309

Table 8-1 New Profile - General Parameters (Continued)
Field/Option
High Definition
Video Switching
Operator
Conference
4
Click the Advanced tab.
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
If the Operator Conference option is selected, this
option is disabled, and the selection is cleared.
When selected, the conference is ultra-high quality
video resolution, in a special conferencing mode which
implies that all participants must connect at the same
line rate and use HD video.
This feature utilizes the resources more wisely and
efficiently by:
•
Saving utilization of video ports (1 port per
participant as opposed to 4 ports in CP mode).
•
Video display is in full screen mode only and video
is switched to the speaker.
Drawbacks of this feature are that all participants must
connect at the same line rate, (e.g. HD) and all
participants with endpoints not supporting HD will
connect as secondary (audio only).
Select the High Definition resolution; select either
HD 720p or HD 1080p (in MPM+ and MPMx mode
only).
If HD 1080p is selected, endpoints that do not support
HD 1080p resolution are connected as Secondary
(Audio Only) participants.
Notes:
•
High Definition Video Switching conferencing mode
is unavailable to ISDN participants.
For more information, see "Video Resolutions in
CP" on page 2-4.
Select this option to define the profile of an Operator
conference.
An Operator conference can only be a Continuous
Presence conference, therefore when selected, the
High Definition Video Switching option is disabled and
cleared.
When defining an Operator Conference, the Send
Content to Legacy Endpoints option in the Video
Settings tab is cleared and disabled.
8-11