Rmx 2000 Multiple Services Configuration - Polycom RMX 1500 Administrator's Manual

In this case, up to four different IP Network Services can be defined - one
for each RTM LAN/RTM ISDN cards installed in the system.
Several cards can be assigned to the same IP Network Service. The
definition of the network services attached to the RMX unit and which
cards are assigned to each network service is defined in the IP Network
Service.

RMX 2000 Multiple Services Configuration

Connecting the cables to the RTM IP:
The following cables are connected to the RTM IP on the rear panel of the
RMX2000:
Table 14-29 LAN Connections to the RTM IP
RTM IP Port Description
LAN 1 –
LAN 2 Management
LAN 3 Modem
Connecting the cables to the RTM LAN:
If RTM LAN or RTM ISDN cards are not installed on the RMX, they must be
installed before connecting the additional network cables for media and
signaling.
Table 14-30 LAN Connections to the RTM LAN
RTM IP Port Description
LAN 1 –
LAN 2 Signaling and Media - first Network Service (optional)
Polycom RMX 1500/2000/4000 Administrator's Guide
14-71