Polycom RMX 1500 Administrator's Manual page 520

14-82
One IP Network Service can be defined as default for H.323 connections
and another Network Service as default for SIP connections. If the IP
Network Service supports both H.323 and SIP connections, you can set
the same Network Service as default for both H.323 and SIP, or for H.323-
only or for SIP-only.
To designate an IP Network Service as the default IP Network Service:
1 In the Device Management pane, click IP Network Services (
2
In the Network Services list pane right-click the IP Network Service to
be set as the default, and then click Set As H.323 Default, or Set As
SIP Default.
The next time you access this menu, a check mark is added next to the
network service type to indicate its selection as default.
To set this IP Network Service for both H.323 and SIP connections,
repeat step 2 and select the option you need.
The following icons are used to indicate the default IP Network
Service type:
Table 14-35 Default IP Network Service Icons
Icon Description
This Network Service supports both SIP and H.323
connections and is designated as default for both SIP
and H.323 connections.
This Network Service supports both SIP and H.323
connections and is designated as default for H.323
connections.
This Network Service supports both SIP and H.323
connections and is designated as default for SIP
connections.
This Network Service supports only H.323
connections and is set as default for H.323
connections.
This Network Service supports only SIP connections
and is set as default for SIP connections.
Chapter 14-Network Services
).