Polycom RMX 1500 Administrator's Manual page 759

Hide thumbs Also See for RMX 1500:

Table of Contents

This dialog box is used to define whether the query sent to the MCU

is sent from an authorized source. When the "Accept SNMP packets

from all Hosts" is disabled, a valid query must contain the appropriate

community string and must be sent from one of the Manager

terminals whose IP address is listed in this dialog box.

14 Define the following parameters:

SNMP - Security

Select this check box to send a message to the

Authentication

SNMP Manager when an unauthorized query is

sent to the MCU. When cleared, no indication will

be sent to the SNMP Manager.

Enter the string added to queries that are sent

from the SNMP Manager to indicate that they

were sent from an authorized source.

Note: Queries sent with different strings will be

regarded as a violation of security, and, if the

Send Authentication Trap check box is selected,

an appropriate message will be sent to the SNMP

Select this option if a query sent from any

Packets from

Manager terminal is valid. When selected, the

Accept SNMP Packets from These Hosts option

is disabled.

Lists specific Manager terminals whose queries

Packets from

will be considered as valid. This option is enabled

the following

when the Accept SNMP Packets from any Host

option is cleared.

Polycom RMX 1500/2000/4000 Administrator's Guide

Troubleshooting

Rmx 4000 Rmx 2000