Rmx Management - Polycom RMX 1500 Administrator's Manual

Hide thumbs Also See for RMX 1500:

Table of Contents

Chapter 18-RMX Manager Application

The Conferences list toolbar contains the following buttons:

Save Conference

Delete Conference

New Conference

If Conference Recording is enabled the following buttons are enabled:

Start/Resume Recording – start/resume recording.

Stop Recording – stop recording.

toggles with the Start/Resume button.

Monitoring conferences

New conferences run on MCUs selected for Monitoring are automatically

added to the Conferences list. You can sort the conferences by MCU by

clicking the MCU column heading in the Conferences table. Conferences

run on MCUs that are connected but not monitored are not listed.

Using Windows multiple selection methods to select conferences,

participants from several conferences running on different MCUs can be

listed in the Participants list pane.

Starting a new conference

When starting a new conference, you must first select the MCU to run the

conference in the MCUs pane.

RMX Management

The RMX Management pane lists the entities of the selected MCU that

need to be configured to enable the RMX to run conferences. Only users

with Administrators permission can modify these parameters.

The RMX Management pane is divided into two sections:

Frequently Used – parameters often configured monitored or

Rarely Used – parameters configured during initial system set-up

and rarely modified afterward.

Start/Resume/Pause Recording

Stop Recording

List Headers

Conference Data

Rmx 4000 Rmx 2000