Notification Settings
The RMX can display notifications when:
•
A new RMX user connects to the MCU.
•
A new conference is started.
•
Not all defined participants are connected to the conference or when
a single participant is connected
•
A change in the MCU status occurs and an alarm is added to the
alarm's list.
A welcome message is displayed to the RMX user upon connection.
To configure the notifications:
1
On the RMX menu, select Setup > Notification Settings.
The Notification Settings dialog box is displayed.
Polycom RMX 1500/2000/4000 Administrator's Guide
19-115