Performing Advanced Mode Diagnostics - Polycom RMX 1500 Administrator's Manual

Chapter 20-RMX Hardware Monitoring

Performing Advanced Mode Diagnostics

20-38
To run Diagnostics you are required to Login with administrator permissions.
To run Advanced Mode Diagnostics on a Hardware Component:
•
Most of the user interfaces illustrated in this section show the RMX 2000
with MPMx cards. The Advanced Mode for other RMXs with MPM+ card(s)
are identical.
• On the RMX 1500 less "slots" are used and the module naming conventions
used on elements are different.
•
Before running Advanced Mode Diagnostic testing on the CNTL module,
you must insert two formatted FAT32 USB keys in the two slots of the CNTL
panel USB ports of the RMX 2000/4000. On the RMX1500 insert the USB
key in the front panel mouse or keyboard slot.