Polycom RMX 1500 Administrator's Manual page 444

14-6
Table 14-1 Default Management Network Service – IP (Continued)
Field
Control Unit IP
Address
Description
IPv4 The IPv4 address of the RMX Control
Unit. This IP address is used by the
RMX Web Client to connect to the RMX.
The IPv6 address of the RMX Control
Unit. This IP address is used by the
RMX Web Client to connect to the RMX.
Note: Internet Explorer 7™ is required
for the RMX Web Client to connect to
the RMX using IPv6.
Click the All button to display the
IPv6
IPv6 addresses as follows:
•
All
•
Chapter 14-Network Services
Auto - If selected, Site-Local
and Global site addresses are
displayed.
Manual if selected, only the
Manual site address is
displayed.