Polycom RMX 1500 Administrator's Manual page 687

Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
BONDING_DIALING
_METHOD
(ISDN)
BURN_BIOS
CONF_GATHERING
_DURATION_SECONDS
Polycom RMX 1500/2000/4000 Administrator's Guide
Description
When set to:
•
SEQUENTIAL
The MCU initiates channel connections
sequentially until it reaches the number of
channels defined by the
BONDING_NUM_CHANNELS_IN
_GROUP flag.
When a channel is connected, dialing
begins for the next channel in the group.
•
BY_TIMERS
The MCU initiates channel connections
sequentially using the values of the
BONDING_CHANNEL _DELAY and
BONDING_GROUP_DELAY flags.
The first group of channels is dialed, using
the BONDING_CHANNEL_DELAY
between dialing attempts for each channel
in the group.
The RMX then implements the
BONDING_GROUP_DELAY, before
dialing the first channel of the next group.
Default: SEQUENTIAL
Although, not recommended, setting this flag's
value to NO will prevent BIOS upgrade.
Default: YES.
The value of this System Flag sets the
duration of the Gathering Phase in seconds.
The Gathering Phase duration of the
conference is measured from the scheduled
start time of the conference.
Range: 0 - 3600
Default: 180
For more information see "Video Preview" on
page 2-46.
19-23