Monitoring Registration Status - Polycom RMX 1500 Administrator's Manual

Monitoring Registration Status

The SIP registration status can be viewed in the Entry Queue or SIP Factory
list panes.
The following statuses are displayed:
• Not configured - Registration with the SIP Server was not enabled in
the Conference Profile assigned to the Entry Queue or SIP Factory.
• Failed - Registration with the SIP Server failed.
This may be due to incorrect definition of the SIP server in the IP
Network Service, or the SIP Server may be down, or any other reason
the affects the connection between the RMX or the SIP Server to the
network.
• Registered - the conferencing entity is registered with the SIP Server.
• Partially Registered - This status is available only in Multiple
Networks configuration, when the conferencing entity failed to
register to all the required Network Services if more than one Network
Service was selected for Registration.
Polycom RMX 1500/2000/4000 Administrator's Guide
5-17