Task 5: Configuring The Rmx For Ice Dialing - Polycom RMX 1500 Administrator's Manual

2
Enter dsa.msc and click OK.
The Active Directory Users and Computers console opens.
3
Right-click the RMX user, and select Configure Communications
Server Users.
4 In the Configure Communications Server Users wizard, click Next.
5
In the Configure User Settings page, select the Federation and Remote
user access check boxes.
— Remote user access is required for all deployments that include
remote or federated users.
— Federation is only required when you are supporting federated
users.
6
Click Next and select any additional configuration settings for your
deployment.
7 When complete, click Finish.

Task 5: Configuring the RMX for ICE Dialing

For details, see "Configuring the RMX for Federated (ICE) Dialing" on
page H-118.
Polycom RMX 1500/2000/4000 Administrator's Guide
H-79