Monitoring the Connection to the STUN and Relay Servers
in the ICE Environment
retrieval of the STUN server and Relay server parameters for ICE
dialing.
These parameters can be viewed in the Signaling Monitor - ICE Servers
dialog box.
1
In the RMX Web browser, in the RMX Management pane, click
Signaling Monitor.
2
In the Signaling Monitor pane, click the IP Network Service entry.
3
Click the ICE Servers tab.
The system lists the ICE servers to which it is connected and the
status of the connection of each of the RMX media cards (status 1,
status 2, etc) to ICE servers. (One status is displayed for RMX 1500,
two statuses are displayed for RMX 2000 and four statuses are
displayed for RMX 4000).
It addition, the system indicates the status of the firewall detection in
the RMX.
Polycom RMX 1500/2000/4000 Administrator's Guide
H-121