Polycom RMX 1500 Administrator's Manual page 450

14-12
9
View or modify the following fields:
Table 14-4 Management Network Properties – LAN Ports Parameters
Field
Port Speed The RMX2000 has 3 LAN ports. The administrator can set
the speed and transmit/receive mode manually for LAN 2
Port only.
Port
Speed
10 Click OK.
11 If you have modified the Management Network Properties, reset the
MCU.
Chapter 14-Network Services
Description
The LAN port number: 1, 2 or 3.
Note: Do not change the automatic setting
of Port 1 and Port 3. Any change to Port 1
speed will not be applied.
Select the speed and transmit/receive
mode for each port.
Default: Auto – Negotiation of speed and
transmit/receive mode starts at 1000 Mbits/
second Full Duplex, proceeding downward
to 10 Mbits/second Half Duplex.
Note: To maximize conferencing
performance, especially in high bit rate call
environments, a 1Gb connection is
recommended.