Using Ipv6 Networking Addresses For Rmx Internal And External Entities - Polycom RMX 1500 Administrator's Manual

Using IPv6 Networking Addresses for RMX Internal and
External Entities
IPv6 Guidelines
IPv6 addresses can be assigned to both RMX (Internal) and External Entity
addresses.
RMX Internal Addresses
Default Management Network Service
• Control Unit
• Signaling Host
• Shelf Management
• MPM1 (Media Card)
• MPM2 (Media Card)
External Entities
• Gatekeepers (Primary & Secondary)
• SIP Proxies
• DNS Servers
• Default Router
• Defined participants
• Internet Explorer 7™ is required for the RMX Web Client and RMX
Manager to connect to the RMX using IPv6.
• IPv6 is supported with MPM+ and MPMx media cards only.
• The default IP address version is IPv4.
• Internet Explorer 7™ is required for the RMX Web Client use an IPv6
connection to the RMX.
• The IP address field in the Address Book entry for a defined participant
can be either IPv4 or IPv6. A participant with an IPv4 address cannot
be added to an ongoing conference while the RMX is in IPv6 mode
nor can a participant with an IPv6 address be added while the RMX is
in IPv4 mode.
Polycom RMX 1500/2000/4000 Administrator's Guide
14-39