Dell Z9500 Command Reference Manual page 1627

nopassword
password
secret
encryption-
type
password
privilege level
role role-name
secret
Defaults The default encryption type for the password option is 0. The default encryption
type for the secret option is 0.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.5(0.1)
9.5(0.0)
9.2(1.0)
9.0.2.0
8.3.19.0
8.3.11.1
Security
Enter the keyword nopassword to specify that the user
should not enter a password.
Enter the keyword password then the encryption-type
or the password.
Enter the keyword secret then the encryption-type or
the password.
Enter an encryption type for the password that you enter.
• 0 directs the system to store the password as clear text. It
is the default encryption type when using the password
option.
• 7 to indicate that a password encrypted using a DES
hashing algorithm follows. This encryption type is
available with the password option only.
• 5 to indicate that a password encrypted using an MD5
hashing algorithm follows. This encryption type is
available with the secret option only, and is the default
encryption type for this option.
Enter a string up to 32 characters long.
Enter the keyword privilege then a number from zero (0)
to 15.
Enter the keyword role followed by the role name to
associate with that user ID.
Enter the keyword secret then the encryption type.
Description
Added support for roles on the Z9500.
Added support for roles on the Z9000, S6000, S4820T,
S4810, MXL.
Introduced on the Z9500.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
1627