Tacacs-Server Key - Dell Z9500 Command Reference Manual

tacacs-server key

tacacs-server key
Configure a key for communication between a TACACS+ server and a client.
Z9500
Syntax
tacacs-server key [encryption-type] key
To delete a key, use the no tacacs-server key key command.
Parameters
encryption-
type
key
Defaults Not configured.
Command CONFIGURATION
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.7.1.0
7.6.1.0
7.5.1.0
6.2.1.1
Usage The key configured with this command must match the key configured on the
Information TACACS+ daemon.
Security
— configures a TACACS+ key for the TACACS server.
(OPTIONAL) Enter either zero (0) or 7 as the encryption type
for the key entered. The options are:
• 0 is the default and means the key is not encrypted and
stored as clear text.
• 7 means that the key is encrypted and hidden.
Enter a text string, up to 42 characters long, as the clear text
password. Leading spaces are ignored.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Authentication key length increased to 42 characters.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
1639