Privilege Level (Line Mode) - Dell Z9500 Command Reference Manual

Version
8.3.11.1
8.3.7.0
7.6.1.0
7.5.1.0
6.1.1.0
Usage To define a password for the level to which you are assigning privilege or access,
Information use the enable password command.

privilege level (LINE mode)

Change the access level for users on the terminal lines.
Z9500
Syntax
privilege level level
To delete access to a terminal line, use the no privilege level level
command.
Parameters
level level
Defaults level = 15
Command LINE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.2(1.0)
8.3.19.0
8.3.11.1
8.3.7.0
7.6.1.0
1608
Description
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced on the E-Series.
Enter the keyword level then a number for the access level.
The range is from 0 to 15.
Level 1 is EXEC mode and Level 15 allows access to all CLI
modes.
Description
Introduced on the Z9500.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Security