Dp To Dtmf Signal Conversion - Panasonic DBS 40 Operating Manual

Section 700 - Operation
(All Versions)
Description
Related Programming
Considerations

DP to DTMF Signal Conversion

(All Versions)
Description
Operation
Related Programming
Considerations
Technical Manuals Online! - http://www.tech-man.com
The DBS allows both dial pulse and DTMF extension types.
FF2 (Trunk): DTMF/Pulse Dialing for Trunks
l
DP to DTMF Signal Conversion allows DTMF extensions to use either
l
dial pulse or DTMF trunks.
This feature allows an extension user to switch from DP to DTMF signaling
when using a DP trunk.
For instance, if a user dials into a voice mail system using a DP trunk, the user
can switch to DTMF signaling to communicate with the voice mail system.
DTMF tones can be sent either during the call or while the call is being
dialed.
To switch from dial pulse to DTMF dialing, press "*" or 'W."
FF2 (Trunk): DTMF/Puise Dialing for 'Trunks
l
DTMF dialing remains in effect for the duration of the call. Pulse dialing is
l
restored when the handset is replaced.
Chapter 2. System Features