Download  Print this page

Advertisement

Panasonic Telephone Systems
Panasonic
KX-TDA50
KX-TDA100
KX-TDA200
KX-TDA600
Panasonic KX-TDA50/KX-TDA100/KX-TDA200/KX-TDA600
Thank you for purchasing a Panasonic Hybrid IP-PBX.
Please read this manual carefully before using this product and save this manual for future use.
KX-TDA50: PSMPR Software File Version 4.0000 or later
KX-TDA100/KX-TDA200: PMPR Software File Version 5.0000 or later
KX-TDA600: PLMPR Software File Version 5.0000 or later
www.voicesonic.com
Phone: 877-289-2829
Hybrid IP-PBX
Feature Manual
Document Version: 2008-03

Advertisement

Table of Contents

   Summary of Contents for Panasonic KX-TDA600

  • Page 1 Please read this manual carefully before using this product and save this manual for future use. KX-TDA50: PSMPR Software File Version 4.0000 or later KX-TDA100/KX-TDA200: PMPR Software File Version 5.0000 or later KX-TDA600: PLMPR Software File Version 5.0000 or later Document Version: 2008-03...
  • Page 2 About the Feature Manual The Feature Manual is designed to serve as an overall reference describing the features of the Panasonic Hybrid IP-PBX. It explains what the PBX can do, as well as how to obtain the most of its many features and facilities.
  • Page 3 Some optional service cards, PTs, and features are not available in some areas. In the same respect, some optional service cards and features are available exclusively for the KX-TDA50, KX- TDA100, KX-TDA200, or KX-TDA600. Please consult your certified Panasonic dealer for more information.
  • Page 4: Feature Highlights

    Feature Highlights Networking Features The PBX supports the following private networking features: TIE Line Service PBXs can be connected via a privately leased telephone lines, forming a private network. These "TIE lines" provide a cost-effective way to route calls and communications, and are often used to connect corporate offices located in different cities.
  • Page 5 Portable Station (PS) Features A Panasonic PS (e.g., KX-TD7680, KX-TD7690) can be used in place of a PT to provide wireless access to PBX features and call handling. When in Wireless XDP Parallel Mode, a PS can share an extension number with a wired telephone, allowing extension users to use their PSs when they are away from their desks to answer or make calls as if they were using their wired telephones.
  • Page 6: List Of Abbreviations

    List of Abbreviations AA → Automated Attendant ACD → Automatic Call Distribution ANI → Automatic Number Identification APT → Analog Proprietary Telephone ARS → Automatic Route Selection BGM → Background Music CCBS → Completion of Calls to Busy Subscriber CF → Call Forwarding—QSIG CLI →...
  • Page 7 G-CO → Group-CO ICD → Incoming Call Distribution IP-PT → IP Proprietary Telephone IRNA → Intercept Routing—No Answer ISDN → Integrated Services Digital Network L-CO → Loop-CO LCS → Live Call Screening LED → Light Emitting Diode NDSS → Network Direct Station Selection OGM →...
  • Page 8 VM → Voice Mail VoIP → Voice over Internet Protocol VPS → Voice Processing System XDP → EXtra Device Port Feature Manual...
  • Page 9: Table Of Contents

    Table of Contents Features and Configurations............... 13 A ............................14 1.1.1 Absent Message ......................14 1.1.2 Account Code Entry ......................15 1.1.3 ARS (Automatic Route Selection) ..................16 1.1.4 Automatic Callback Busy (Camp-on) ................22 1.1.5 Automatic Extension Release ..................23 1.1.6 Automatic Fax Transfer ....................
  • Page 10 1.5.2 Emergency Call........................90 1.5.3 Executive Busy Override ....................90 1.5.4 Extension Dial Lock......................92 1.5.5 Extension Feature Clear ....................93 1.5.6 Extension PIN (Personal Identification Number) ..............94 1.5.7 Extension Port Configuration ...................95 1.5.8 External Relay........................96 1.5.9 External Sensor .......................97 F .............................100 1.6.1 Fixed Buttons ......................... 100 1.6.2 Flash/Recall/Terminate....................
  • Page 11 1.11.3 Message Waiting......................178 1.11.4 Music on Hold ........................ 181 1.11.5 Mute ..........................182 1.12 O ............................ 184 1.12.1 Off-hook Monitor ......................184 1.12.2 OGM (Outgoing Message)..................... 184 1.12.3 OHCA (Off-hook Call Announcement) ................187 1.12.4 One-touch Dialing ......................188 1.12.5 Operator Features......................
  • Page 12 Capacity of System Resources................... 342 Exclusive Features Table..................... 346 Tones/Ring Tones......................347 Revision History......................349 2.4.1 KX-TDA600 PLMPR Software File Version 5.0xxx ............349 2.4.2 KX-TDA100/KX-TDA200 PMPR Software File Version 1.1xxx ........349 2.4.3 KX-TDA100/KX-TDA200 PMPR Software File Version 2.0xxx ........350 2.4.4...
  • Page 13: Features And Configurations

    Section 1 Features and Configurations Feature Manual...
  • Page 14: Absent Message

    1.1 A 1.1.1 Absent Message Description Extension users can prepare a brief text message (Absent Message) that will be displayed to other extension users when they are called. These messages can explain the reason for their absence, and may be edited through system programming and personal programming. The following Absent Messages may be programmed: Message Type...
  • Page 15: Account Code Entry

    1.1 A 2.13.5 [6-5] Absent Message PT Programming Manual [008] Absent Message Feature Manual References 2.1 Capacity of System Resources Operating Manual References 1.3.1 Absent Message 3.1.2 Personal Programming 1.1.2 Account Code Entry Description An account code is used to identify outgoing CO line calls for accounting and billing purposes. The account code is appended to the Station Message Detail Recording (SMDR) call record.
  • Page 16: Ars (automatic Route Selection)

    1.1 A Programming References PC Programming Manual 2.9.8 [2-6-1] Numbering Plan—Main—Features—Account Code Entry 2.9.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Account Code Mode PT Programming Manual [508] Account Code Mode Feature Manual References 1.3.19 COS (Class of Service) 1.6.3 Flexible Buttons 1.16.1 SMDR (Station Message Detail Recording) Operating Manual References 1.2.1 Making Calls...
  • Page 17 1.1 A [Carrier Selection Procedure Flowchart] The numbers in parentheses indicate the corresponding items found under [Programming Procedures] on the following pages. An extension user accesses a CO line and dials a telephone number. No (Normal CO Line Access) Is the ARS mode (1) enabled? Sends the telephone number as dialed.
  • Page 18 1.1 A Also note that the CO Line Access number is always ignored by ARS and does not need to be programmed here. Calls that are exempt from ARS are connected to the user-selected line, via the default carrier for that line.
  • Page 19 → 2.15.5 [8-4] Routing Plan Priority → [331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only) → [347] ARS Routing Plan Table (1–48) (KX-TDA600 only) Carrier Table Each carrier must be programmed in the Carrier Table. Here each carrier is assigned a carrier number, name, the CO lines it is used with, etc.
  • Page 20 → 2.15.6 [8-5] Carrier—Carrier—Carrier Name → [350] ARS Carrier Name → 2.15.6 [8-5] Carrier—TRG 01–TRG 64 (KX-TDA50/KX-TDA100/KX-TDA200), or TRG 01– TRG 96 (KX-TDA600) → [351] ARS Trunk Group for Carrier Access → 2.15.6 [8-5] Carrier—Carrier—Carrier Access Code → [353] ARS Carrier Access Code →...
  • Page 21 1.1 A ARS Options Authorization Code for Tenant A Carrier Authorization Code can be assigned to each tenant. → 2.15.6 [8-5] Carrier—Authorization Code for Tenant Authorization Code for Trunk Group A Carrier Authorization Code can be assigned to each trunk group. →...
  • Page 22: Automatic Callback Busy (camp-on)

    [325] ARS Exception Number [330] ARS Routing Plan Time Table [331–346] ARS Routing Plan Table (1–16) (KX-TDA50/KX-TDA100/KX-TDA200 only) [347] ARS Routing Plan Table (1–48) (KX-TDA600 only) [350] ARS Carrier Name [351] ARS Trunk Group for Carrier Access [352] ARS Removed Number of Digits for Carrier Access...
  • Page 23: Automatic Extension Release

    1.1 A Callback ringing will be sent to extensions in the order that the feature was set. In other words, the extension that set the feature first will receive a callback ringing first. • This feature cannot be used for calls to a Voice Processing System (VPS). Programming References PC Programming Manual 2.9.8 [2-6-1] Numbering Plan—Main—Features—Automatic Callback Busy Cancel...
  • Page 24: Automatic Fax Transfer

    1.1 A 1.1.6 Automatic Fax Transfer Description The PBX can distinguish between fax calls and other types of calls arriving on DISA lines, and automatically transfer fax calls to preprogrammed destinations. When a call arrives on a DISA line, an OGM is played (→ 1.12.2 OGM (Outgoing Message)).
  • Page 25: Automatic Time Adjustment

    1.1 A Installation Manual References 2.5.3 MSG2 Card (KX-TDA5191) Programming References PC Programming Manual 2.12.4 [5-3-2] Voice Message—DISA Message—Fax Extension (KX-TDA50 only) PT Programming Manual None Feature Manual References 1.4.7 DISA (Direct Inward System Access) 2.2 Exclusive Features Table 1.1.7 Automatic Time Adjustment Description The PBX clock can be adjusted automatically in the following two ways:...
  • Page 26 1.1 A Conditions • Station Message Detail Recording (SMDR) will log call information using the PBX clock so that the logging time will be overlapped at the end of Daylight Saving Time. (→ 1.16.1 SMDR (Station Message Detail Recording)) Programming References PC Programming Manual 2.9.1 [2-1] Date &...
  • Page 27: Bgm (background Music)

    Programming References PC Programming Manual 2.9.3 [2-2] Operator & BGM → BGM and Music on Hold—Music Source of BGM2 (KX-TDA100/KX-TDA200/KX-TDA600 only) → BGM and Music on Hold—Music Source of BGM (KX-TDA50 only) 2.9.8 [2-6-1] Numbering Plan—Main—Features → External BGM On / Off...
  • Page 28 1.2 B → BGM Set / Cancel 2.9.19 [2-11-1] Audio Gain—Paging/MOH → MOH—MOH 1 (Music On Hold 1) (KX-TDA100/KX-TDA200/KX-TDA600 only) → MOH—MOH 2 (Music On Hold 2) (KX-TDA100/KX-TDA200/KX-TDA600 only) → MOH—MOH (Music On Hold) (KX-TDA50 only) 2.12.2 [5-2] External Pager...
  • Page 29: Caller Id

    1.3 C 1.3.1 Caller ID Description The PBX can receive Caller ID information (a caller's name and telephone number) from calls received on CO lines. This information can be shown on a proprietary telephone (PT) display when receiving a call and can be used to direct calls from specific callers to specific destinations automatically.
  • Page 30 1.3 C Caller ID-Related Features Features Description Details in Calling Line Identification Caller ID information received by the PBX is used to • 1.3.12 CLI (CLI) Distribution direct calls from specific callers to specific (Calling Line destinations. The caller's telephone number and a Identification) destination must be assigned in the System Speed Distribution...
  • Page 31 1.3 C <Modification Table> Removed No. of Digits Added No. International Call Data National Call Data Subscriber Call Data Data entered under "Removed No. of Digits" and "Added No." for International, National, and Subscriber call data will be applied respectively to international, long distance, and local calls. <Modification Flowchart>...
  • Page 32 KX-TDA50: The EXT-CID card KX-TDA100/KX-TDA200: An SLC8 card with an EXT-CID card installed, or a CSLC16 card KX-TDA600: An SLC8 card with an EXT-CID card installed, a CSLC16 card, or an ECSLC24 card • When the caller's number is sent to an SLT, a CO Line Access number can be automatically added to the telephone number through system programming for calling back.
  • Page 33: Call Hold

    1.3 C • If a call is transferred to an SLT, the transferring extension's information will be shown on the SLT. If the transferring extension goes on-hook before the call is answered, the original caller's information will be shown. • When Caller ID information such as "Private", "Out of Area", or "Long Distance"...
  • Page 34 1.3 C The result of the holding operation can be determined through system programming. Pressing the HOLD button again just after the first time alternates the mode between Regular and Exclusive Call Hold. Conditions • Call Hold Limitation A proprietary telephone (PT) user can hold one intercom call and/or multiple CO line calls at a time. A single line telephone (SLT) user can hold either one intercom call or one CO line call at a time.
  • Page 35 1.3 C • SLT Hold Mode It is possible to choose how to hold and transfer a call with an SLT through system programming. The following methods are available: Hold Hold Transfer to (to be Retrieved from Transfer to CO Line Extension Another Extension) Flashing the...
  • Page 36: Call Log, Incoming

    1.3 C Programming References PC Programming Manual 2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone → Recall—Hold Recall → Recall—Disconnect after Recall 2.9.8 [2-6-1] Numbering Plan—Main—Features → Call Hold / Call Hold Retrieve → Call Hold Retrieve : Specified with a Holding Extension Number →...
  • Page 37 1.3 C --- Caller's name (20 digits max.) John White --- Date and time of a call received DEC.12 10:00AM MON --- Answering Status* NEW: Not Answered 123456789 --- Caller's number (16 digits max.) Call Log buttons This extension Incoming call distribution group "NEW"...
  • Page 38 1.3 C The Cell Station (CS) is busy. • Display Lock The Incoming Call Log of an extension can be locked through personal programming (Directory and Call Log Lock) to prevent other users from viewing its contents. In this case, the Outgoing Call Log display, the Personal Speed Dialing number display and the SVM Log display are also locked, and the voice messages in the user's message box cannot be played back.
  • Page 39: Call Monitor

    1.3 C Feature Manual References 1.3.1 Caller ID 1.6.3 Flexible Buttons 1.16.3 Speed Dialing, Personal 2.1 Capacity of System Resources Operating Manual References 1.4.1 Call Log, Incoming 3.1.2 Personal Programming 1.3.4 Call Monitor Description Allows an extension user to listen to a busy extension user's existing conversation. The user can hear the conversation but will not be heard.
  • Page 40: Call Park

    1.3 C – Voice Mail (VM) Transfer button Programming References PC Programming Manual 2.9.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Call Monitor 2.9.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Call Monitor 2.11.1 [4-1-1] Wired Extension—Extension Settings → Option 2—Data Mode → Option 3—Executive Override Deny 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 3—Executive Override Deny PT Programming Manual None...
  • Page 41 1.3 C Light pattern Status Slow red flashing A call is parked in the preset parking zone There are no parked calls • Call Park (Automatic Park Zone) Button Pressing the Call Park (Automatic Park Zone) button parks a call in an idle parking zone automatically. Any flexible button can be customized as the Call Park (Automatic Park Zone) button.
  • Page 42: Call Pickup

    (1) the user's extension is allowed to use this feature through COS programming (for KX-TDA100, KX-TDA200, and KX-TDA600 only), (2) DSS buttons for extensions or incoming call distribution (ICD) groups have this feature enabled through system programming, and (3) the light pattern of DSS buttons for incoming calls to extensions or ICD groups is set to "On or Flash"...
  • Page 43: Call Splitting

    1.3 C Programming References PC Programming Manual 2.9.8 [2-6-1] Numbering Plan—Main—Features → Group Call Pickup → Directed Call Pickup → Call Pickup Deny Set / Cancel 2.9.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Call Pickup by DSS 2.9.17 [2-9] System Options—Option 4 →...
  • Page 44: Call Transfer

    1.3 C 1.3.8 Call Transfer Description An extension user can transfer a call to another extension or an outside party. The following features are available: Feature Transferring method Transfer is completed after announcing the transfer to the destination With Announcement party.
  • Page 45 [201] Transfer Recall Time [503] Call Transfer to CO Line [712] Music for Transfer Feature Manual References 1.3.19 COS (Class of Service) Operating Manual References 1.3.11 Call Transfer 1.3.49 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension (KX-TDA100/KX- TDA200/KX-TDA600 only) Feature Manual...
  • Page 46: Call Waiting Features

    1.3 C 1.3.9 CALL WAITING FEATURES Description Used to inform a busy extension that another incoming call is waiting. The busy extension user can answer the second call by disconnecting the current call or placing it on hold. The following notification method can be assigned for each extension depending on the call waiting and the telephone type: Call Waiting Tone: Tone from the handset or built-in speaker OHCA: Voice from the built-in speaker...
  • Page 47 1.3 C • OHCA and Whisper OHCA are enabled or disabled by the Class of Service (COS) of the calling extension. • OHCA and Whisper OHCA are not compatible with some telephone types. In such cases, a Call Waiting tone will be sent to the called extension. Called Extension's Call Waiting Mode OHCA Mode of Calling...
  • Page 48: Call Waiting Tone

    1.3 C 1.3.10 Call Waiting Tone 1.12.3 OHCA (Off-hook Call Announcement) 1.16.1 SMDR (Station Message Detail Recording) 1.20.3 Whisper OHCA Operating Manual References 1.3.12 CALL WAITING FEATURES 1.3.13 Call Waiting Tone 3.1.2 Personal Programming 1.3.10 Call Waiting Tone Description When an extension user attempts to call a busy extension (i.e., an extension that is ringing or having a conversation), a call waiting tone can be sent to the called extension to indicate another call is waiting.
  • Page 49: Cellular Phone Features

    1.3 C Operating Manual References 1.3.13 Call Waiting Tone 3.1.2 Personal Programming 1.3.11 CELLULAR PHONE FEATURES Description This PBX provides features to support the use of cellular phones and other outside destinations with the PBX. Calls can be forwarded from virtual PSs to outside destinations such as cellular phones, and then answered as if the user was at an extension within the PBX.
  • Page 50: Cli (calling Line Identification) Distribution

    1.3 C 1.3.12 CLI (Calling Line Identification) Distribution Description Directs an incoming CO line call to a specific destination when the caller's telephone number matches a number in the System Speed Dialing Table. Each telephone number in this table can be assigned its own Calling Line Identification (CLI) destination.
  • Page 51: Clip (calling Line Identification Presentation)

    → CO Line Access Number + Telephone Number → CLI Destination 2.17.2 [10-2] DIL Table & Port Settings—DIL—CLI Ring for DIL—Day, Lunch, Break, Night 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—CLI Ring for DID—Day, Lunch, Break, Night PT Programming Manual [001] System Speed Dialing Number...
  • Page 52 CLIR button, COLR button or entering the feature number. Conditions • CLIP, COLP, CLIR, and COLR are only available for the KX-TDA100, KX-TDA200, and KX-TDA600. • The availability of this feature is dependent on the contract with the telephone company.
  • Page 53: Co Line Access

    1.3 C → Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Subscriber Number 2.9.8 [2-6-1] Numbering Plan—Main—Features → COLR Set / Cancel → CLIR Set / Cancel →...
  • Page 54 1.3 C Method Description Operation Idle Line Access Selects an idle CO line automatically Dial the Idle Line Access number or (Local Access) from the assigned trunk groups. press a L-CO button. Trunk Group Access Selects an idle CO line from the Dial the Trunk Group Access number and corresponding trunk group.
  • Page 55 PC Programming Manual 2.8.5 [1-1] Slot—Port Property - Extension Port—Connection 2.8.11 [1-1] Slot—Port Property - LCO Port—Connection 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Connection 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Connection 2.8.20 [1-1] Slot—Port Property - IP-GW Port—Connection 2.8.24 [1-1] Slot—Port Property - IP-Extension Port—Connection...
  • Page 56: Co Line Call Limitation

    1.3 C 1.3.15 CO Line Call Limitation Description CO line calls are limited by the following features: Feature Description Extension-to-CO Line Call If a call between an extension user and an outside party is established, Duration the call duration can be restricted by the system timer selected for each trunk group.
  • Page 57: Conference

    1.3 C Feature Manual References 1.3.19 COS (Class of Service) 1.3.16 Conference Description An extension user can establish a conference call by adding additional parties to an already existing two- party conversation. This PBX supports three-party through eight-party conference calls. Conferences with more than four parties are only possible when a PT or PS user originates the conference.
  • Page 58: Confirmation Tone

    1.3 C KX-TDA600 2.8.6 EECHO16 Card (KX-TDA6166) Programming References PC Programming Manual 2.9.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf → Unattended Conference—Recall Start Timer → Unattended Conference—Warning Tone Start Timer → Unattended Conference—Disconnect Timer 2.9.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Transfer to CO 2.9.17 [2-9] System Options—Option 3...
  • Page 59 1.3 C Type Description Tone 3-1 Sent before a conversation is established using the Paging feature. Sent to the caller when a conversation is established with an extension in one of the following modes: • Hands-free Answerback mode • Voice-calling mode (Alternate Receiving—Ring/Voice) Sent when making a call to or from a doorphone.
  • Page 60: Consultation Hold

    1.3 C 1.3.18 Consultation Hold Description Consultation Hold is a condition that a party is in, when an extension is calling other parties in order to perform Call Transfer, Conference, or Call Splitting. When the operation is completed or canceled, the consultation hold is released.
  • Page 61: Cpc (calling Party Control) Signal Detection

    → 1.11.1 Manager Features → 1.13.28 PT Programming → 1.13.7 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension—SDN Key mode, SDN Walking COS, and assigning SDN buttons through PT programming (KX-TDA100/ KX-TDA200/KX-TDA600 only) Conditions • Walking COS Extension users can make a call from extensions of a less-privileged COS by using their own COS temporarily.
  • Page 62: Cti (computer Telephony Integration)

    Computers can be connected to the PBX to provide extension users with access to advanced features such as pop-up display of caller information, computer-based speed dialing, etc. These features are made available by running customized Computer Telephony Integration (CTI) software, available from Panasonic (PC Console, PC Phone, etc.) as well as third-party software vendors.
  • Page 63 1.3 C software being used, the CTI Server can determine how calls are distributed to the extensions of the PBX and can also control what information is sent to the PCs when their extensions receive calls. CTI Server LAN or USB Interface Conditions [General]...
  • Page 64 2.9.4 First Party Call Control CTI Connection 2.13.1 Connection of Peripherals Programming References PC Programming Manual 2.8.28 [1-1] Slot—Card Property - CTILINK (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.9.8 [2-6-1] Numbering Plan—Main—Features—Dial Information (CTI) 2.9.17 [2-9] System Options—Option 6 (CTI) PT Programming Manual None...
  • Page 65: Data Line Security

    1.4 D 1.4.1 Data Line Security Description Once Data Line Security is set on an extension, communication between the extension and the other party is protected from signals such as Call Waiting, Hold Recall and Executive Busy Override. Extensions which have devices connected to them such as modems or fax machines may set this feature to maintain secure data transmission, by blocking tones or other interruptions during communication.
  • Page 66: Dial Tone

    PC Programming Manual 2.8.11 [1-1] Slot—Port Property - LCO Port → Dialing Mode → DTMF Width → Pulse Speed 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only) → CO Dial Mode → DTMF Width → CO Pulse Speed PT Programming Manual...
  • Page 67: Dial Tone Transfer

    1.4 D Type Description Tone 3A/3B This tone is heard when: • A called PS is being searched for. • The recording time used by the Simplified Voice Message (SVM) feature reaches the limit.* • Any of the features below are performed. •...
  • Page 68 1.4 D [Example] A hotel guest calls the front desk and asks for the telephone's toll restriction to be lifted in order to make an international call. (3) Make a CO line call (2) Change TRS level Toll Restriction button (1) Call Guest Room Front Desk...
  • Page 69: Did (direct Inward Dialing)

    Incoming calls with DID numbers that match extensions at other PBXs or CO line access numbers will be sent to the corresponding TIE line or CO line. This feature is only available for the KX-TDA100, KX-TDA200, and KX-TDA600. [Method Flowchart] A CO line call is received on a DID line.
  • Page 70 → [451] DID Number (KX-TDA100/KX-TDA200/KX-TDA600 only) → 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Name → [452] DID Name (KX-TDA100/KX-TDA200/KX-TDA600 only) → 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—CLI Ring for DID—Day, Lunch, Break, Night → 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Destination—Day, Lunch, Break, Night →...
  • Page 71: Dil (direct In Line)

    1.4 D → DID/TIE—Additional Dial 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only) PT Programming Manual [451] DID Number (KX-TDA100/KX-TDA200/KX-TDA600 only) [452] DID Name (KX-TDA100/KX-TDA200/KX-TDA600 only) [453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only) Feature Manual References 1.3.12 CLI (Calling Line Identification) Distribution 1.9.10 INCOMING CALL FEATURES 1.17.3 Tenant Service...
  • Page 72 1.4 D [Method Flowchart] A CO line call is received. Does the call have Caller ID information and is CLI distribution enabled for the CO line in the current time mode? Has the caller been stored in the System Speed Dialing Table and has a CLI destination been assigned? Is a DIL destination assigned...
  • Page 73: Disa (direct Inward System Access)

    1.4 D The tenant number programmed here is used only to determine the Time Table used by each CO line; selecting tenant 3 means the CO line will use Time Table 3, for example. The VM trunk group number set here is used to determine the Incoming Call Service and greeting message used by the Voice Processing System (VPS) during the current time mode.
  • Page 74 1.4 D [Flowchart] A DISA call from an outside party is received. Is there an idle port on an MSG card? The call is routed to an operator, etc. (DISA Intercept when All (DISA Delayed DISA Ports are busy) Answer time expires) The PBX answers the call.
  • Page 75 1.4 D Continued from previous page No Security None None None None CO Line Security All Security Is the dialed number an extension number or floating extension number? Is the Walking COS/Verification Code Entry feature number dialed? What is the dialed number? Is the correct PIN entered? Other...
  • Page 76 1.4 D Continued from previous page Continued from previous page What method is assigned for DISA Intercept Is an Intercept Routing DND? Routing Busy destination assigned? The call is routed to Intercept Routing Busy tone the intercept destination. (Intercept Routing Busy) Does the caller Is a DISA Busy press...
  • Page 77 1.4 D Outgoing Message (OGM) When a call arrives on a DISA line, a prerecorded DISA message will greet and guide the caller. Any extension assigned as the manager can record outgoing messages (OGMs). (→ 1.12.2 OGM (Outgoing Message)) [Programming Example] Outgoing Automated Attendant No.
  • Page 78 1.4 D DISA Intercept Routing—Busy If the first destination called by the outside party is busy, the call is redirected as follows: The call is redirected to the Intercept Routing—Busy destination assigned to the first destination. If an Intercept Routing—Busy destination is not assigned to the first destination and a prerecorded DISA Busy Message is assigned, the caller will hear the DISA Busy Message.
  • Page 79 1.4 D • Time Service Switching Mode (→ 1.17.5 Time Service) DISA Automatic Walking COS Registered outside destinations such as cellular phones can be automatically recognized as PBX extensions when calling through DISA. When the Caller ID of a received CO line call matches an entry in the System Speed Dialing Table, the calling telephone is given Walking COS authorization as assigned to the corresponding CLI destination extension.
  • Page 80 • Hardware Requirement: KX-TDA50: An MSG2 card KX-TDA100/KX-TDA200/KX-TDA600: An OPB card, and MSG4 card or ESVM4 card • DISA Delayed Answer Time It is possible to set the Delayed Answer time so that the caller will hear a ringback tone within a preprogrammed time period first before hearing an outgoing message (OGM).
  • Page 81 1.4 D 2.9.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf → DISA—CO-to-CO Call Prolong Counter → DISA—CO-to-CO Call Prolong Time → [210] DISA CO-to-CO Line Call Prolong Time • Automatic DISA Activation DISA can be set through system programming to automatically activate for the following types of CO- to-CO line calls, to enable detection of the end of the call.
  • Page 82 Installation Manual References KX-TDA50 2.5.3 MSG2 Card (KX-TDA5191) KX-TDA100/KX-TDA200 2.6.1 OPB3 Card (KX-TDA0190) 2.6.5 MSG4 Card (KX-TDA0191) KX-TDA600 2.8.1 OPB3 Card (KX-TDA0190) 2.8.4 MSG4 Card (KX-TDA0191) 2.8.5 ESVM4 Card (KX-TDA0194) Programming References PC Programming Manual 2.9.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf →...
  • Page 83: Display Information

    1.4 D 2.12.3 [5-3-1] Voice Message—DISA System 2.12.4 [5-3-2] Voice Message—DISA Message 2.13.1 [6-1] System Speed Dial → CO Line Access Number + Telephone Number → CLI Destination 2.17.2 [10-2] DIL Table & Port Settings → DIL—DIL Destination—Day, Lunch, Break, Night →...
  • Page 84 Original Destination, if the call is forwarded Panasonic DID name Duration of the current CO line call – Line 001 11:02'28 Only available for KX-TDA100, KX-TDA200, and KX-TDA600. Conditions • Multilingual Display Each extension can select its display language through personal programming (Display Language Selection).
  • Page 85: Dnd (do Not Disturb)

    1.4 D Operating Manual References 3.1.2 Personal Programming 1.4.9 DND (Do Not Disturb) Description An extension user can make use of the DND feature. If this feature is set, calls will not arrive at the extension, but will arrive at another extension using the Idle Extension Hunting feature (→ 1.9.9 Idle Extension Hunting) or the Intercept Routing—Busy/DND feature (→...
  • Page 86: Door Open

    2.8.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays KX-TDA100/KX-TDA200 2.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays KX-TDA600 2.12.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays Programming References PC Programming Manual 2.9.4 [2-3] Timers &...
  • Page 87: Doorphone Call

    • Hardware Requirement: KX-TDA50: An optional doorphone and a DPH card KX-TDA100/KX-TDA200/KX-TDA600: An optional doorphone, the OPB card and DPH card • Call Destination The destination of doorphone calls can be assigned to each doorphone port for each time mode. The Time Table is determined by the tenant number assigned to each doorphone port.
  • Page 88 KX-TDA100/KX-TDA200 2.6.1 OPB3 Card (KX-TDA0190) 2.6.2 DPH4 Card (KX-TDA0161) 2.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays KX-TDA600 2.8.1 OPB3 Card (KX-TDA0190) 2.8.2 DPH4 Card (KX-TDA0161) 2.12.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays...
  • Page 89: Efa (external Feature Access)

    Programming References PC Programming Manual 2.8.11 [1-1] Slot—Port Property - LCO Port—Flash Time 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Flash Time 2.9.8 [2-6-1] Numbering Plan—Main—Features—External Feature Access 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 7—Flash Mode during CO Conversation 2.11.5 [4-1-4] Wired Extension—Flexible Button—Type 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 7—Flash Mode during CO Conversation...
  • Page 90: Emergency Call

    Extension Dial Lock (→ 1.5.4 Extension Dial Lock) • CLIP Number Notification (KX-TDA100/KX-TDA200/KX-TDA600 only) When dialing an emergency number, the preassigned CLIP number for the extension will be sent as a location identification number. (→ 1.3.13 CLIP (Calling Line Identification Presentation)) The CLIP number assigned to the extension will be sent regardless of the settings such as CLIR or CLIP number assigned to an ISDN port to be used.
  • Page 91 1.5 E Is receiving an Off-hook Call Announcement (OHCA) (→ 1.12.3 OHCA (Off-hook Call Announcement)) or Whisper OHCA (→ 1.20.3 Whisper OHCA). Is on a conference call (→ 1.3.16 Conference, → 1.13.12 Privacy Release). Is on a doorphone call (→ 1.4.11 Doorphone Call). Is using Live Call Screening (LCS) or Two-way Record (→...
  • Page 92: Extension Dial Lock

    1.5 E 1.5.4 Extension Dial Lock Description An extension user can change the Toll Restriction (TRS) level of the telephone (→ 1.17.6 TRS (Toll Restriction)) so that other users cannot make inappropriate CO line calls. An extension personal identification number (PIN) is used to unlock the telephone (→ 1.5.6 Extension PIN (Personal Identification Number)).
  • Page 93: Extension Feature Clear

    1.5 E 1.5.5 Extension Feature Clear Description Extension users can clear the following features set on their own telephone all at once: Features After Setting Absent Message FWD*/DND* Call Pickup Deny Allow Call Waiting* Enable (Call Waiting tone) Data Line Security Executive Busy Override Deny Allow Log-in/Log-out...
  • Page 94: Extension Pin (personal Identification Number)

    1.5 E Operating Manual References 1.3.25 Extension Feature Clear 1.5.6 Extension PIN (Personal Identification Number) Description Each extension user can be assigned a personal identification number (PIN) through system programming or personal programming (Extension PIN [Personal Identification Number]). This PIN is used to set features or access the extension remotely.
  • Page 95: Extension Port Configuration

    Processing Systems (VPS) to the PBX. The devices which can be connected to each type of port are listed below. DPT Port: DPT, DSS Console, Panasonic VPS which supports DPT (Digital) Integration, and PT- interface CS (e.g., KX-TDA0141) APT Port (For KX-TDA50 only): APT, DSS Console, and Panasonic VPS which supports DPT...
  • Page 96: External Relay

    1.5 E • A DSS Console or a Panasonic VPS which supports DPT (Digital) Integration can also be connected with an SLT in XDP mode. • APT and SLT in Parallel Mode An APT and an SLT can also be connected to a Super Hybrid port and used in parallel mode.
  • Page 97: External Sensor

    KX-TDA100/KX-TDA200 2.6.1 OPB3 Card (KX-TDA0190) 2.6.3 EIO4 Card (KX-TDA0164) 2.9.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays KX-TDA600 2.8.1 OPB3 Card (KX-TDA0190) 2.8.3 EIO4 Card (KX-TDA0164) 2.12.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays...
  • Page 98 • Hardware Requirement: KX-TDA50: An external sensor and DPH card KX-TDA100/KX-TDA200/KX-TDA600: An external sensor, OPB card and EIO card • Some devices may be unable to communicate correctly with the PBX. Confirm compatibility with the manufacturer of a device before installing it.
  • Page 99 2.12.1 Connection of Doorphones, Door Openers, External Sensors, and External Relays Programming References PC Programming Manual 2.8.25 [1-1] Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only) → Input Signal Decision Time → Input Signal Detection Reopening Time 2.8.29 [1-1] Slot—Card Property - DPH type (KX-TDA50 only) →...
  • Page 100: Fixed Buttons

    1.6 F 1.6.1 Fixed Buttons Description Proprietary telephones (PTs), DSS Consoles, and Add-on Key Modules feature a wide variety of feature buttons and Line Access buttons, explained below. Note that certain models do not feature certain buttons. For a description of the buttons found on portable stations (PSs), please refer to the Operating Instructions for each PS.
  • Page 101 1.6 F Button Usage TRANSFER Used to transfer a call to another party. Used to access a CO line or trunk group when making or receiving a call Flexible CO according to the button's preprogrammed CO Line Access method (Default: S-CO). Can also be customized as a different feature button. INTERCOM Used to make or receive intercom calls.
  • Page 102: Flash/recall/terminate

    Programming References PC Programming Manual 2.8.11 [1-1] Slot—Port Property - LCO Port—Disconnect Time 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Disconnect Time 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 7—Flash Mode during CO Conversation 2.11.5 [4-1-4] Wired Extension—Flexible Button—Type 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 7—Flash Mode during CO Conversation 2.11.13 [4-2-3] Portable Station—Flexible Button—Type...
  • Page 103: Flexible Buttons

    1.6 F Feature Manual References 1.6.3 Flexible Buttons 1.6.3 Flexible Buttons Description You can customize the flexible buttons and/or programmable feature (PF) buttons on PTs, Add-on Key Modules, and PSs through either system or personal programming. They can then be used to make or receive intercom or CO line calls or be used as feature buttons, as follows: [Button Usage] Button...
  • Page 104 1.6 F Button Usage External Feature Access (EFA) Used to send a flash/recall signal to the telephone company or host PBX to access external features. (→ 1.5.1 EFA (External Feature Access)) Call Park Used to park or retrieve a call in a preset PBX parking zone. (→...
  • Page 105 Primary Directory Number Used to make and receive both outside and intercom calls. (PDN) (KX-TDA100/KX-TDA200/ (→ 1.13.7 PDN (Primary Directory Number)/SDN (Secondary Directory KX-TDA600 only) Number) Extension) Secondary Directory Number Used to show the current status of another extension, call the extension, (SDN) (KX-TDA100/KX-TDA200/ and pick up or transfer calls to it.
  • Page 106: Flexible Numbering/fixed Numbering

    0-9, " ", and "#" [Flexible Numbering Table (available while a dial tone is heard)] Feature Default Pattern 1 Pattern 2 (with (without KX-TDA50/ KX-TDA600 KX-TDA100/ KX-TDA200 Extension Numbering Scheme 1—Leading 10 / 20 Number Extension Numbering Scheme 2—Leading 11 / 21 Number Extension Numbering Scheme 3—Leading...
  • Page 107 1.6 F Feature Default Pattern 1 Pattern 2 (with (without KX-TDA50/ KX-TDA600 KX-TDA100/ KX-TDA200 Extension Numbering Scheme 4—Leading 13 / 23 Number Extension Numbering Scheme 5—Leading None 14 / 24 Number Extension Numbering Scheme 6—Leading None 15 / 25 Number Extension Numbering Scheme 7—Leading...
  • Page 108 1.6 F Feature Default Pattern 1 Pattern 2 (with (without KX-TDA50/ KX-TDA600 KX-TDA100/ KX-TDA200 Extension Numbering Scheme 22— Leading Number Extension Numbering Scheme 23–64— None None None Leading Number Operator Call Idle Line Access (Local Access) Trunk Group Access TIE Line Access...
  • Page 109 1.6 F Feature Default Pattern 1 Pattern 2 (with (without KX-TDA50/ KX-TDA600 KX-TDA100/ KX-TDA200 Call Hold/Call Hold Retrieve Call Hold Retrieve—Specified with a Holding Extension Number Call Park/Call Park Retrieve Call Hold Retrieve—Specified with a Held CO line Number Door Open...
  • Page 110 1.6 F Feature Default Pattern 1 Pattern 2 (with (without KX-TDA50/ KX-TDA600 KX-TDA100/ KX-TDA200 Executive Busy Override Deny set/cancel Not Ready Mode on/off Log-in/Log-out Incoming Call Queue Monitor Hot Line program/set/cancel Absent Message set/cancel BGM set/cancel Remote Wake-up Call Timed Reminder set/cancel...
  • Page 111 1.6 F [Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)] Feature Default Call Waiting/DND Override 1 or 2* Executive Busy Override Message Waiting set Call Monitor Automatic Callback Busy Alternate Calling—Ring/Voice To use Call Waiting/DND Override, both "1" and "2" are available by default. Fixed Numbering (available while dialing or talking) Features which are available while dialing or talking have fixed numbers, as shown in the following table: [Fixed Numbering Table (available while dialing or talking)]...
  • Page 112: Floating Extension

    1.6 F → Extension → Features → Other PBX Extension 2.9.9 [2-6-2] Numbering Plan—Quick Dial 2.9.10 [2-6-3] Numbering Plan—B/NA DND Call Feature PT Programming Manual [100] Flexible Numbering Feature Manual References 1.13.24 PS Connection 1.19.3 Voice Mail (VM) Group 2.1 Capacity of System Resources Operating Manual References 4.2.1 Feature Number Table 1.6.5...
  • Page 113 [700] External Pager Floating Extension Number [730] Outgoing Message (OGM) Floating Extension Number [731] Outgoing Message (OGM) Name [811] Modem Floating Extension Number [812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only) Feature Manual References 1.13.6 PC Programming 1.19.3 Voice Mail (VM) Group...
  • Page 114: Fwd (call Forwarding)

    1.6 F 1.6.6 FWD (Call Forwarding) Description Extensions and incoming call distribution groups can forward their calls to preset destinations. There are several different types of forwarding, and the circumstances under which the calls are forwarded for each type differ as follows: Type Circumstance All Calls...
  • Page 115 1.6 F [Available Destinations] Condition for Original Extension/ Destination Availability Incoming Call Distribution Group Wired Extension (PT/SLT/T1-OPX) Only available when FWD to extension is allowed through COS programming.* ICD Group PS Ring Group – Floating Extension no. for SVM – VM Group (DTMF/DPT) –...
  • Page 116 1.6 F • Multiple FWD Calls can be forwarded up to four times. The following forwarding features are counted as Multiple FWD: – FWD—Busy or Busy/No Answer (when the destination extension is busy), or All Calls – Idle Extension Hunting—Overflow –...
  • Page 117 1.6 F – Doorphone call – CO line calls via the ELCOT, LCOT, or T1 (LCOT/GCOT) cards [No Answer and Busy/No Answer] • No Answer Time The number of rings before the call is forwarded is programmable for each extension. [Follow Me] •...
  • Page 118: Fwd/dnd Button, Group Fwd Button

    1.6 F 1.6.7 FWD/DND Button, Group FWD Button Description The FWD/DND fixed button, or a customized flexible button, can display the FWD/DND setting status of the extension. Using this button, the FWD status and DND status of the extension can be temporarily set or canceled without clearing FWD destination settings.
  • Page 119 1.6 F FWD/DND Setting by Fixed FWD/DND button Pressing the fixed FWD/DND button in idle status allows the extension user to set the following items for FWD/DND: • FWD/DND for CO line calls The FWD/DND status for CO line calls to that extension can be switched temporarily without clearing the FWD destination.
  • Page 120 1.6 F → Group FWD Set / Cancel: Call from Extension 2.9.17 [2-9] System Options—Option 1 → PT Fwd / DND—Fwd LED → PT Fwd / DND—DND LED → PT Fwd / DND—Fwd/DND key mode when Idle 2.11.1 [4-1-1] Wired Extension—Extension Settings—FWD / DND Reference 2.11.5 [4-1-4] Wired Extension—Flexible Button →...
  • Page 121: Group Features

    1.7 G 1.7.1 GROUP FEATURES Description This PBX supports various types of groups. Trunk Group CO lines can be grouped into trunk groups based on carrier, CO line type, etc. Several settings can be assigned on a trunk group basis. All CO lines belonging to a trunk group follow the programming for that trunk group.
  • Page 122 1.7 G [Example] Call Pickup Group 1 Call Pickup Group 2 Call Pickup Group 3 Extension User Extension User Extension User Extension User Group 1 Group 2 Group 3 Group 4 Extn. 100 Extn. 101 Extn. 102 Extn. 103 Extn. 104 Extn. 105 Extn.
  • Page 123 1.7 G [Example] ICD Group 1 ICD Group 2 (Floating Extn. No. 601, (Floating Extn. No. 602, Name: Sales 1) Name: Sales 2) Extn. 103 Extn. 104 Extn. 105 Extn. 106 Extn. 107 Extn. 100 Extn. 101 Extn. 102 VM Group There are two types of VM groups, explained below.
  • Page 124 1.7 G PS Ring Group 1 PS Ring Group 2 Floating Extension No. 301 Floating Extension No. 302 Name: Sales 1 Name: Sales 2 PS 1 PS 2 PS 3 PS 4 PS 5 (Extn. 601) (Extn. 602) (Extn. 603) (Extn.
  • Page 125: Hands-free Answerback

    1.8 H 1.8.1 Hands-free Answerback Description A proprietary telephone (PT) user with a speakerphone or optional headset can talk to a caller without lifting the handset. If the user receives a call in Hands-free Answerback mode, a hands-free conversation is established in the following method: Type Answering Method...
  • Page 126: Hands-free Operation

    1.8 H 2.11.1 [4-1-1] Wired Extension—Extension Settings → Option 5—Automatic Answer for CO Call → Option 6—Forced Automatic Answer PT Programming Manual None Feature Manual References 1.9.13 Intercom Call Operating Manual References 1.3.30 Hands-free Answerback 1.8.2 Hands-free Operation Description A proprietary telephone (PT) user can talk to another party without lifting the handset. Pressing specific buttons, such as REDIAL, automatically activate hands-free mode.
  • Page 127: Hospitality Features

    1.8 H • To set the headset mode on a digital proprietary telephone (DPT), use personal programming (Headset Operation) or press the Headset button. To set headset mode on an analog proprietary telephone (APT), use the handset/headset selector located on the telephone and/or on the headset. •...
  • Page 128: Host Pbx Access Code (access Code To The Telephone Company From A Host Pbx)

    1.8 H Feature Description Details in Room Status Control An extension designated as the hotel operator can set the • 1.15.3 Room check-in status of rooms remotely. Status Control Remote Wake-up Call An extension designated as the hotel operator can set a •...
  • Page 129 1.8 H [Example] Telephone Company Host PBX Access Code: 0 Host PBX Outside Party (01-23-4567) Idle Line Access No.: 9 Extn. 101 Extn. 102 Dials "0-01-23-4567". TRG1 Host PBX Access Code Telephone Dials "9-0-01-23-4567". Dials "9-101". Idle Line Idle Line Telephone No.
  • Page 130: Hot Line

    1.8 H • A Host PBX Access Code can be used to record only long distance calls on SMDR when a CO line port is connected directly to the telephone company (not a host PBX). This is allowed when the long distance code (e.g., “0”) is assigned as the Host PBX Access code.
  • Page 131 1.8 H [204] Hot Line Waiting Time Feature Manual References 2.1 Capacity of System Resources Operating Manual References 1.3.34 Hot Line Feature Manual...
  • Page 132: Icd Group Features

    1.9 I 1.9.1 ICD GROUP FEATURES Description An incoming call distribution group is a group of extensions programmed through system programming. → 2.10.13 [3-5-1] Incoming Call Distribution Group—Member List → [620] Incoming Call Distribution Group Member An incoming call distribution group receives calls directed to the group. Each incoming call distribution group has a floating extension number (default: 6 + two-digit group number).
  • Page 133 1.9 I Calls arrive at ICD group 1. Overflow Feature a) Sends a busy tone (Busy on Busy), or b) Redirects to the overflow destination. Queuing Feature Five calls are waiting in the queue. (Calls 4 through 8) Manual Queue Redirection The longest waiting call in a queue can be redirected to the overflow Call Distribution...
  • Page 134 1.9 I VIP Call [→ 1.9.8 ICD Group Features—VIP Call] It is possible to assign a priority to incoming call distribution groups so that incoming calls can be received in priority order. Overflow Feature [→ 1.9.5 ICD Group Features—Overflow] A call is redirected to a preprogrammed destination when it cannot be answered or queued (Intercept Routing—Overflow in an Incoming Call Distribution Group).
  • Page 135 1.9 I automatically registered in the lowest-numbered available member slot for the group. Calls to the group can be received at the extension with no further programming. If no member slots are available for that group, the button cannot be created and an alarm tone will be heard. When creating an ICD Group button in this mode, the user can also specify the delayed ringing settings.
  • Page 136: Icd Group Features-group Call Distribution

    1.9 I 2.1 Capacity of System Resources 1.9.2 ICD Group Features—Group Call Distribution Description Incoming calls directed to an incoming call distribution group are distributed to the member extensions using the selected distribution method until a preprogrammed number of extensions (agents) are busy with calls. When incoming calls exceed the number of available extensions, calls enter a queue (→...
  • Page 137 1.9 I Distribution Method Description Ring All extensions in the group ring simultaneously. Delayed Ringing: Delayed ringing or no ringing can be programmed for each extension in the group. The call can be answered by pressing the flashing button even if no ring or a delayed time is set. Extn.
  • Page 138 1.9 I or Priority Hunting.) Calls will arrive at idle buttons until all ICD Group buttons are occupied— additional calls will wait in a queue. Note In method b), if an extension has one or more ICD Group buttons for an incoming call distribution group and all the ICD Group buttons on the extension are occupied, the Group Call Waiting feature for the group will not work at the extension.
  • Page 139: Icd Group Features-log-in/log-out

    1.9 I → Miscellaneous—Maximum No. of Busy Extensions 2.10.15 [3-5-3] Incoming Call Distribution Group—Miscellaneous—Options—Longest Idle Distribution (Optional SD Card Required) 2.10.13 [3-5-1] Incoming Call Distribution Group—Member List—Delayed Ring PT Programming Manual [621] Incoming Call Distribution Group Delayed Ringing [624] Incoming Call Distribution Group Distribution Method [632] Maximum Number of Agents 1.9.3 ICD Group Features—Log-in/Log-out...
  • Page 140 1.9 I Light Pattern Parameter Usage Red on No parameter Used with an ICD Group button, or with — — the floating extension number of an incoming call distribution group, or with (All). Floating extension number of a Used to log in to or out of the specified Log-out Log-in Status specified incoming call...
  • Page 141: Icd Group Features-outside Destinations

    1.9 I Programming References PC Programming Manual 2.9.8 [2-6-1] Numbering Plan—Main—Features → Log-in / Log-out → Not Ready (Manual Wrap-up) Mode On / Off 2.10.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Miscellaneous → No. of Unanswered Calls for Automatic Log-out → Last Extension Log-out 2.10.15 [3-5-3] Incoming Call Distribution Group—Miscellaneous—Options—Wrap-up Timer based on 2.10.13 [3-5-1] Incoming Call Distribution Group—Member List—Wrap-up Timer 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 8—Wrap-up Timer...
  • Page 142 1.9 I • An extension user can have his PT and multiple cellular phones ring together for calls. • An employee who is not in the office, but is still available to answer calls, can receive calls to an ICD Group. Cellular Company Telephone Company...
  • Page 143 2.9.11 [2-7-1] Class of Service—COS Settings—CO & SMDR—Call Forward to CO 2.9.17 [2-9] System Options—Option 4—Send CLIP of CO Caller to ISDN—when ICD Group with Cellular Phone (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.10.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main → Floating Extension Number →...
  • Page 144: Icd Group Features-overflow

    1.9 I 1.9.5 ICD Group Features—Overflow Description When waiting calls exceed the waiting queue capacity, they may be redirected to a preprogrammed destination or a busy tone may be sent to the callers by the following features: Intercept Routing—Overflow in an Incoming Call Distribution Group Busy on Busy Intercept Routing—Overflow in an Incoming Call Distribution Group Intercept Routing—Overflow in an Incoming Call Distribution Group works in one of following...
  • Page 145 1.9 I Destination Availability Trunk Group Access no. + Trunk Group no. + Phone no. Extension of Another PBX (via TIE Line, Access with PBX Code) Extension of Another PBX (via TIE Line, Access without PBX Code) Busy on Busy The Busy on Busy feature works when the destination for the Intercept Routing—Overflow in an Incoming Call Distribution Group feature is not assigned in one of the following conditions: There is no space in the Waiting queue.
  • Page 146: Icd Group Features-queuing

    1.9 I Feature Manual References 1.9.6 ICD Group Features—Queuing 1.9.6 ICD Group Features—Queuing Description When a preprogrammed number of extensions in an incoming call distribution group are busy, additional incoming calls can wait in a queue. The number of calls which can wait in the queue is programmable. While calls are waiting in the queue, the calls are handled by the Queuing Time Table, which can be assigned for each time mode (day/lunch/break/night) (→...
  • Page 147 We are sorry to Thank you for overflow 30 seconds. the overflow keep you holding. calling Panasonic. destination. destination. All of our agents are All of our agents are still handling currently handling other calls. We other calls.
  • Page 148: Icd Group Features-supervisory

    1.9 I 2.10.14 [3-5-2] Incoming Call Distribution Group—Queuing Time Table 2.10.18 [3-7-1] VM(DPT) Group—System Settings—Call Waiting on VM Group 2.10.21 [3-8-1] VM(DTMF) Group—System Settings—Others—Call Waiting on VM Group 2.11.5 [4-1-4] Wired Extension—Flexible Button → Type → Ext. No. / Floating Ext. No. (for Hurry-up) 2.11.13 [4-2-3] Portable Station—Flexible Button →...
  • Page 149 1.9 I [Example] <Incoming Call Queue Monitor Display> --- Date and time JAN.31 08:13AM FRI --- ICD group's floating extension number and name 601:Sales Section --- Number of calls waiting in the queue Waiting Calls Now :00006 --- Elapsed waiting time of the call queuing the longest Max.
  • Page 150: Icd Group Features-vip Call

    1.9 I Conditions • Available Extension as a Supervisor Extension One supervisor extension can be assigned for each incoming call distribution group, but it need not belong to the group. One extension can be the supervisor extension of more than one incoming call distribution group. •...
  • Page 151: Idle Extension Hunting

    1.9 I Calls have been distributed by DIL/DID/CLI distribution. (The circled numbers indicate the arrival order of the calls. ICD Group 1 ICD Group 2 (for VIPs) (for general customers) Priority Priority Extn. Extn. Extn. Distribution order: From: Group 1 Group 3 Groups 2 and 4 Priority Priority...
  • Page 152 1.9 I Type Description Circular Hunting An idle extension is searched for in the order specified in the idle extension hunting group in a circular way. Incoming call Busy Extn. Extn. Extn. Extn. Assignment order Terminated Hunting An idle extension is searched for in the order specified in the idle extension hunting group until reaching the last assigned extension.
  • Page 153 1.9 I • If all the searched extensions are busy: The PBX redirects the call to an overflow destination which can be assigned for each idle extension hunting group and each time mode (day/lunch/break/night) (→ 1.17.5 Time Service). [Available Destination] Destination Availability Wired Extension (PT/SLT/T1-OPX)
  • Page 154: Incoming Call Features

    Each CO line port (channel) of a CO line card is assigned a port (channel) type which determines the CO line's networking type—public or private. → 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Trunk Property → 2.17.2 [10-2] DIL Table & Port Settings—DIL—Trunk Property...
  • Page 155 1.9 I Feature Description Details in Calling Line Identification Directs a call to its preprogrammed destination if the • 1.3.12 CLI (CLI) Distribution caller's telephone number and its CLI destination (Calling Line has been stored in the System Speed Dialing Table. Identification) Distribution Available Distribution Method for Public CO Lines...
  • Page 156: Intercept Routing

    • 1.9.12 Intercept to an operator. Routing—No Destination Programming References PC Programming Manual 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Trunk Property 2.17.2 [10-2] DIL Table & Port Settings—DIL—Trunk Property PT Programming Manual None 1.9.11 Intercept Routing Description Redirects an incoming CO line call or intercom call to a preprogrammed destination when the original destination does not, or can not, answer the call.
  • Page 157 1.9 I Type Description Busy If a called party is already handling a call, new calls are handled as follows: – The call is redirected to the preprogrammed Intercept Routing— Busy destination. – If an Intercept Routing—Busy destination is not enabled, the caller will hear a busy tone.
  • Page 158 1.9 I When the original destination is: The Available Intercept Destination is: If all DISA ports are busy when a call is made using • DISA DISA, one of the following can be selected through system programming: • Disable: Busy tone is sent to the caller. When using an analog CO line, a ringback tone is sent.
  • Page 159 1.9 I [Available Intercept Destination] The following can be used as intercept destinations: Intercept Destination Availability Wired Extension (PT/SLT/T1-OPX) ICD Group PS Ring Group Floating Extension no. for SVM VM Group (DTMF/DPT) External Pager (TAFAS) DISA Analog/ISDN Remote Maintenance Idle Line Access no. + Phone no. Trunk Group Access no.
  • Page 160 1.9 I • Idle Extension Hunting If an extension is a member of an idle extension hunting group, calls to that extension will not be redirected by Intercept Routing—Busy/DND. If the extension is busy or in DND mode, calls to that extension will be redirected to the next extension in the idle extension hunting group.
  • Page 161: Intercept Routing-no Destination

    1.9 I 1.9.12 Intercept Routing—No Destination Description Directs a CO line call to an operator when the call has no assigned destination. Conditions • Intercept Routing—No Destination on/off Intercept Routing—No Destination can be enabled or disabled for the entire system, through system programming.
  • Page 162 The called party may deny voice-calling. • PDN/SDN (KX-TDA100/KX-TDA200/KX-TDA600 only) It is not possible to temporarily change the called party's preset call receiving method when making a call using a Primary Directory Number (PDN) button or Secondary Directory Number (SDN) button (→...
  • Page 163: Internal Call Block

    1.9 I 1.9.14 Internal Call Block Description Internal calls can be restricted based on the Class of Service (COS) assigned to the caller and to the called party. [Programming Example: Internal Call Block] Called Party Caller COS 1 COS 2 COS 3 COS...
  • Page 164: Ip-pt (ip Proprietary Telephone)

    1.9 I Programming References PC Programming Manual 2.9.13 [2-7-3] Class of Service—Internal Call Block—COS Number of the Extension Which Receive the Call from Other Extension 1–64 2.10.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—COS 2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—COS 2.11.10 [4-2-1] Portable Station—Extension Settings—Main—COS 2.12.1 [5-1] Doorphone—COS 2.12.6 [5-4] External Relay—COS Number PT Programming Manual...
  • Page 165: Isdn (integrated Services Digital Network) Features

    Integrated Services Digital Network (ISDN) is a digital switching and transmission network. ISDN transmits voice, data, and image in digital format. ISDN lines can be connected to public lines (CO lines), private lines (QSIG). ISDN Service features are only available for KX-TDA100, KX-TDA200, and KX-TDA600. ISDN Interface and Configuration Interface Type...
  • Page 166 – the # key is pressed (programmable). → 2.9.17 [2-9] System Options—Option 2—End of Dial Plan—[#] as End of Dial for en Bloc mode (KX-TDA100/KX-TDA200/KX-TDA600 only) – the dialed number is a preprogrammed telephone number. → 2.10.4 [3-1-4] Dialing Plan –...
  • Page 167 → 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 7—ISDN Bearer Programming References PC Programming Manual 2.8.13 [1-1] Slot—Card Property - PRI type (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.8.15 [1-1] Slot—Port Property - PRI Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.9.4 [2-3] Timers &...
  • Page 168: Led Indication

    1.10 L 1.10 L 1.10.1 LED Indication Description The LED of the Message/Ringer Lamp and the following buttons (Line Status Buttons and Corresponding Extension Status Button) can indicate line status with a variety of light patterns. Line Status Buttons: S-CO, G-CO, L-CO, INTERCOM, ICD Group, PDN Corresponding Extension Status Button: DSS, SDN Light Pattern of the Message/Ringer Lamp [Digital proprietary telephone (DPT)]...
  • Page 169 1.10 L Light Pattern of the Line Status Buttons Line Status Incoming Call Intercom Button: Distribution CO Line Status Line Status (ICD) Group Light Line Status Pattern S-CO G-CO L-CO INTERCOM ICD Group Idle Green on This extension is using the line. Slow green This extension is holding the line.
  • Page 170: Line Preference-incoming

    1.10 L Flashing Light Patterns Slow Flashing Moderate Flashing Rapid Flashing Conditions • The incoming CO line call shows on the buttons in the following priority: ICD Group→S-CO→G-CO→L-CO→PDN→INTERCOM • The light pattern of a DSS button for incoming calls can be set to "Off" through system programming. In this case, the DSS button light will not indicate the status of the corresponding extension.
  • Page 171: Line Preference-outgoing

    PDN (KX-TDA100/KX-TDA200/ Answers a call arriving at a Primary Directory Number (PDN) button KX-TDA600 only) simply by going off-hook. This works even when multiple calls are received simultaneously. (→ 1.13.7 PDN (Primary Directory Number)/SDN (Secondary...
  • Page 172: Local Alarm Information

    1.10 L Method Description ICM/PDN When an extension user goes off-hook, an extension line is selected automatically. If the extension is a PDN extension, the first available Primary Directory number (PDN) button is selected automatically. (→ 1.13.7 PDN (Primary Directory Number)/SDN (Secondary Directory Number) Extension) Idle Line When an extension user goes off-hook, an idle CO line is selected...
  • Page 173 The PBX can be automatically diagnosed at a preprogrammed time everyday. Installation Manual References KX-TDA50 4.1.5 Troubleshooting by Error Log KX-TDA100/KX-TDA200 4.1.5 Troubleshooting by Error Log KX-TDA600 4.1.5 Troubleshooting by Error Log Programming References PC Programming Manual 2.6.7 Utility—Message File Transfer PBX to PC Feature Manual...
  • Page 174 1.10 L 2.11.5 [4-1-4] Wired Extension—Flexible Button—Type 2.11.13 [4-2-3] Portable Station—Flexible Button—Type 2.11.17 [4-3] DSS Console—Type 2.18.1 [11-1] Main → SMDR—Print Information—Error Log → Maintenance—Local Alarm Display—Extension 1, Extension 2 → Maintenance—Daily Test Start Time—Set → Maintenance—Daily Test Start Time—Hour →...
  • Page 175: Manager Features

    1.11 M 1.11 M 1.11.1 Manager Features Description An extension assigned as a manager (manager extension) is allowed to use certain features which most extensions cannot. Class of Service (COS) programming determines which extensions are manager extensions and can therefore use the following features: Manager Feature Description...
  • Page 176: Memory Dialing Features

    1.11 M Conditions WARNING There is a risk that fraudulent telephone calls will be made if a third party discovers a personal identification number (PIN) (verification code PIN or extension PIN) of the PBX. The cost of such calls will be billed to the owner/renter of the PBX. To protect the PBX from this kind of fraudulent use, we strongly recommend: Keeping PINs secret.
  • Page 177 1.11 M Feature Storing Method Details in Speed Personal • Personal Programming • 1.16.3 Speed Dialing Dialing, Personal • Personal Operation with the Feature Number • System Programming (PC Programming only) System System Programming • 1.16.4 Speed Dialing, System Quick Dialing System Programming •...
  • Page 178: Message Waiting

    (→ 1.4.3 Dial Tone) • SLT with a Message Waiting Lamp (KX-TDA100/KX-TDA200/KX-TDA600 only) The lamp activates in the same way as the MESSAGE button on a PT provided an EMSLC or MSLC card is connected to the PBX. The preferred Message Waiting Lamp light pattern can be selected from the twelve patterns shown below.
  • Page 179 1.11 M [SLT Message Waiting Lamp Light Patterns] 5.12 s 1.28 s Pattern 1 5.12 s 1.28 s Pattern 2 512 ms 5.12 s 1.28 s Pattern 3 256 ms 2.56 s 768 ms Pattern 4 256 ms 5.12 s 768 ms Pattern 5 256 ms...
  • Page 180 2.9.10 [2-6-3] Numbering Plan—B/NA DND Call Feature—Message Waiting Set 2.9.17 [2-9] System Options → Option 3—Dial Tone—Distinctive Dial Tone → Option 5—SLT—Message Waiting Lamp Pattern (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.10.21 [3-8-1] VM(DTMF) Group—System Settings—VM DTMF Command—Listening Message 2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—SLT MW Mode (KX-TDA100/KX-TDA200/KX- TDA600 only) 2.11.5 [4-1-4] Wired Extension—Flexible Button—Type...
  • Page 181: Music On Hold

    Tone Music Source Assignment [KX-TDA100/KX-TDA200/KX-TDA600] BGM1, BGM2, and tone can be selected as Music on Hold through system programming. External music port 1 is assigned to BGM 1. It is possible to select whether external music port 2, internal audio source 1, or internal audio source 2 is assigned to BGM2.
  • Page 182: Mute

    Programming References PC Programming Manual 2.9.3 [2-2] Operator & BGM → BGM and Music on Hold—Music Source of BGM2 (KX-TDA100/KX-TDA200/KX-TDA600 only) → BGM and Music on Hold—Music Source of BGM (KX-TDA50 only) → BGM and Music on Hold—Music on Hold 2.9.19 [2-11-1] Audio Gain—Paging/MOH...
  • Page 183 1.11 M Operating Manual References 1.3.43 Mute Feature Manual...
  • Page 184: Off-hook Monitor

    1.12 O 1.12 O 1.12.1 Off-hook Monitor Description A proprietary telephone (PT) user can let others listen to the user's conversation through the built-in speaker, during a conversation using the handset. Conditions • Compatible Telephone – KX-T7600 series – KX-T7400 series (display PT only) –...
  • Page 185 KX-TDA100/KX-TDA200/KX-TDA600: An OPB card, and MSG4 card or ESVM4 card • Number of Messages and Recording Time The PBX can record a maximum of 64 (with the KX-TDA100/KX-TDA200/KX-TDA600) or 32 (with the KX-TDA50) messages. • A floating extension number is assigned to each outgoing message (OGM) (default: 5 + two-digit OGM number).
  • Page 186 2.6.6 Utility—Message File Transfer PC to PBX 2.6.7 Utility—Message File Transfer PBX to PC 2.8.25 [1-1] Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only)—MSG Feature 2.9.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf—DISA—Progress Tone Continuation Time before Recording Message 2.9.8 [2-6-1] Numbering Plan—Main—Features—OGM Record / Clear / Playback...
  • Page 187: Ohca (off-hook Call Announcement)

    1.12 O 2.1 Capacity of System Resources Operating Manual References 2.1.3 OGM (Outgoing Messages) 1.12.3 OHCA (Off-hook Call Announcement) Description An extension user can talk with a busy extension through the built-in speaker and microphone of the called party's proprietary telephone (PT). If the existing call is using a handset, a second conversation is made using the speakerphone and microphone so that the called extension can talk to both parties.
  • Page 188: One-touch Dialing

    1.12 O Operating Manual References 1.3.13 Call Waiting Tone 1.12.4 One-touch Dialing Description A proprietary telephone (PT) user can make a call or access a feature with a one-touch operation. This is possible by storing the number, such as an extension number, telephone number, or feature number in a One-touch Dialing button.
  • Page 189: Operator Features

    1.12 O 1.12.5 Operator Features Description Any extension or Incoming Call Distribution (ICD) group can be designated as an operator. This PBX supports the following types of operators: Type Description PBX operator An extension or ICD group can be assigned as a PBX operator for each time mode (day/lunch/break/night).
  • Page 190: Paging

    The announcement is heard through the built-in speakers of proprietary telephones (PTs) and/or external pagers (loudspeakers) which belong to a paging group. (With the KX-TDA100/KX-TDA200/KX-TDA600, up to two external pagers can be connected; with the KX-TDA50, one external pager can be connected.) The paged person can answer the page from a nearby telephone.
  • Page 191 → Option 1—PT Fwd / DND—Paging to DND Extension → Option 3—Confirmation Tone—Tone 2 : Paged / Automatic Answer 2.9.19 [2-11-1] Audio Gain—Paging/MOH → Paging—EPG 1 (External Pager 1) (KX-TDA100/KX-TDA200/KX-TDA600 only) → Paging—EPG 2 (External Pager 2) (KX-TDA100/KX-TDA200/KX-TDA600 only) → Paging—EPG (External Pager) (KX-TDA50 only) →...
  • Page 192: Paralleled Telephone

    1.13 P [640] Extension User Groups of a Paging Group [641] External Pagers of a Paging Group Feature Manual References 2.1 Capacity of System Resources Operating Manual References 1.3.47 Paging 1.13.2 Paralleled Telephone Description By connecting telephones in parallel, you can increase the number of telephones connected to the PBX without adding additional extension cards.
  • Page 193 1.13 P Features Descriptions Connections Digital XDP Allows a DPT to be connected to another DPT which DPT + DPT is connected to a DPT port or a Super Hybrid port of the PBX. The DPT that is connected directly to the Slave Master PBX is called the “master DPT”, and the DPT...
  • Page 194 – KX-TDA100/KX-TDA200: An MEC card and the PSU-M or PSU-L is installed. – KX-TDA600: The PSU-L is installed. • The following features cannot be used on either the master or slave DPT: OHCA: A call waiting tone will be heard even if the OHCA feature is set.
  • Page 195: Password Security

    1.4.3 System Capacity 2.3.2 MEC Card (KX-TDA0105) 2.7.2 Parallel Connection of the Extensions 2.7.3 Digital EXtra Device Port (Digital XDP) Connection KX-TDA600 1.4.3 System Capacity 2.9.2 Parallel Connection of the Extensions 2.9.3 Digital EXtra Device Port (Digital XDP) Connection Programming References PC Programming Manual 2.8.5 [1-1] Slot—Port Property - Extension Port...
  • Page 196 1.13 P Password Description Format System Password (PC) for Used with the user-level programmer code to access user- 4 – 10 User level PC programming. The installer can specify which characters system programming settings are available. System Password (PC) for Used with the administrator-level programmer code to Administrator access administrator-level PC programming.
  • Page 197: Pause Insertion

    ARS mode is enabled. (1.1.3 ARS (Automatic Route Selection)) Programming References PC Programming Manual 2.8.11 [1-1] Slot—Port Property - LCO Port—Pause Time 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Pause Time 2.9.4 [2-3] Timers & Counters—Miscellaneous—During Conversation—Pause Signal Time 2.13.4 [6-4] Second Dial Tone PT Programming Manual [416] LCOT Pause Time 1.13.5 PC Console/PC Phone...
  • Page 198 1.13 P TDA0300 PC Console CTI application, users can enjoy many of the KX-TDA series PBX features while utilizing the benefits of a CTI solution. PC Console gives users access to certain administrative level features that are not available with PC Phone. The extensions that use PC Console must be assigned through system programming.
  • Page 199: Pc Programming

    (DPT). USB Module The PC is connected to the PBX via Ethernet cable to the CTI-LINK card or CTI-LINK card (KX-TDA100/KX-TDA200/KX-TDA600 only) IP-GW4 card or IP-GW4 card (KX-TDA50 only). Modem The PC is connected to a modem, which is then connected...
  • Page 200 1.13 P Remote access must be enabled through system programming when performing on-site programming via modem. Connection Methods for Remote Programming Required Method Description Hardware Off-site modem Call the PBX and have the call directed to the floating RMT card and extension number (default: 599) assigned to the analog remote user-supplied maintenance feature using one of the following methods:...
  • Page 201 → Password—System Password - PC Programming—Installer Level PT Programming Manual [801] External Modem Control [810] Remote Programming [811] Modem Floating Extension Number [812] ISDN Remote Floating Extension Number (KX-TDA100/KX-TDA200/KX-TDA600 only) Feature Manual References 1.4.5 DID (Direct Inward Dialing) 1.4.6 DIL (Direct In Line) Feature Manual...
  • Page 202: Pdn (primary Directory Number)/sdn (secondary Directory Number) Extension

    PDN buttons. PDN buttons can simplify the use of an extension because both intercom and CO line calls can be made and received at a PDN button. This feature is only available for the KX-TDA100, KX-TDA200, and KX-TDA600. Making Calls with an SDN Button When Standard SDN Key mode is assigned to an SDN extension (secretary) through COS programming, SDN extensions (secretaries) can make calls for PDN extensions (bosses) on the SDN button.
  • Page 203 1.13 P Light Pattern PDN Button Status SDN Button Status This extension is idle. The corresponding PDN extension is idle. Green on The extension is on a call using the PDN The extension is on a call using the SDN button.
  • Page 204 1.13 P Example of a Secretary Handling Calls for Multiple Bosses The following example shows the LED patterns of the PDN and SDN buttons of each extension and how calls can be handled. 1) A Call From 111-1111 Arrives at Ext. 101 Ext.
  • Page 205 1.13 P 6) A Call From 333-3333 Arrives at Ext. 102 Ext. 101 (Boss) Ext. 102 (Boss) Ext. 103 (Secretary) PDN buttons SDN buttons PDN buttons SDN buttons PDN buttons SDN buttons (Off) (Off) (Off) (Off) (Off) (Rapid Red Flashing) (Ext.
  • Page 206 The forward no answer timer starts when a PDN extension starts ringing. Programming References PC Programming Manual 2.9.11 [2-7-1] Class of Service—COS Settings—PDN/SDN (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.9.16 [2-8-3] Ring Tone Patterns—Call from Others—Extension—Ring Tone Pattern Plan 1–8 2.9.17 [2-9] System Options—Option 4—System Wireless—SDN Delayed Ringing with LCD (KX-TDA100/...
  • Page 207: Power Failure Restart

    2.11.5 [4-1-4] Wired Extension—Flexible Button → Type → Parameter Selection (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only) → Ext. No. / Floating Ext. No. (for SDN) (KX-TDA100/KX-TDA200/KX-TDA600 only) → Optional Parameter (Ringing Tone Type Number) (for Loop CO, Single CO, Group CO, ICD Group, SDN) 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 9—PDN Delayed Ringing (KX-TDA100/KX-...
  • Page 208: Power Failure Transfer

    [General] • Only CO line calls can be made during a power failure. All other features do not work. [KX-TDA600] • The analog CO line cards, extension cards, and the number of PFT ports (ports which can be used for...
  • Page 209: Predialing

    2.7.7 CSLC16 Card (KX-TDA0177), ESLC16 Card (KX-TDA6174), EMSLC16 Card (KX-TDA6175), and ECSLC24 Card (KX-TDA6178) 2.14.1 Power Failure Connections Programming References PC Programming Manual 2.18.3 [11-3] Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only) PT Programming Manual None 1.13.10 Predialing Description A display proprietary telephone (PT) user can check and correct the number to be dialed on-hook. The call will be initiated after going off-hook.
  • Page 210: Printing Message

    1.13 P 1.13.11 Printing Message Description An extension user can select a message to be output on SMDR. Up to eight messages can be preprogrammed in the Printing Message table, and are available to all extensions connected to the PBX. A message can contain the "%"...
  • Page 211: Private Network Features

    1.13 P Conditions • S-CO Button Any flexible button can be customized as the S-CO button. • Privacy Release Time Privacy is released for five seconds to allow the conversation to be joined. • This feature overrides Data Line Security (→ 1.4.1 Data Line Security) and Executive Busy Override Deny (→...
  • Page 212 1.13 P Explanation TIE Line Routing Flowchart [Making a TIE Line Call from an Extension] A TIE line call is made using one of the following methods: PBX Code Method: TIE Line Access Number + PBX Code + (Extension Number or Other Digits) Extension Number Method: Extension Number Is the dialed number either...
  • Page 213 1.13 P [Receiving a Call through a TIE Line] A call is received via a TIE line. The Incoming Number Modification Table checks the CO line port carrying the call, and modifies the number according to the method assigned for that port. PBX Code Method Extension Number Method (Access with PBX Code)
  • Page 214 1.13 P Making a TIE Line Call One of the following two methods can be used to make a TIE line call. Extension Number Method (Access without PBX Code) Dial the [Extension Number] only. [Example] PBX-1 PBX-2 PBX-3 TIE Line TIE Line Interface Interface Interface...
  • Page 215 1.13 P PBX Code Method (Access with PBX Code) Dial the [TIE Line Access Number] + [PBX Code] + [Extension Number]. → 2.9.8 [2-6-1] Numbering Plan—Main—Features—TIE Line Access → 2.16.1 [9-1] TIE Table—Own PBX Code [Example] PBX-1 PBX-2 PBX-3 PBX Code 951 PBX Code 952 PBX Code 953 TIE Line...
  • Page 216 An outside caller dials "123-4567". The call is sent to extension "2011" of PBX-2 through the TIE line according to the assignment of the DID or DIL call destination of PBX-1. (→ 1.4.5 DID (Direct Inward Dialing)) → 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—DID Destination— Day, Lunch, Break, Night → [453] DID Destination (KX-TDA100/KX-TDA200/KX-TDA600 only)
  • Page 217 1.13 P FWD/Call Transfer/Intercept Routing to the TIE Line [Example] Telephone Company CO Line TIE Line Network CO Line PBX Code 952 PBX Code 952 PBX-1 PBX-2 TIE Line Interface Interface Forwarded/Transferred /Intercepted to 7-952-2011 Outside Caller Extn. 1011 Extn. 2011 Dials "123-4567".
  • Page 218 1.13 P TIE-to-CO Line Access The PBX sends TIE line calls to the CO lines of another PBX through the TIE lines. CO Line Call through Other PBXs—by Making a TIE Line Call Method [Example] <Extension Number Method (Access without PBX Code)> Telephone Company CO Line CO Line...
  • Page 219 1.13 P <PBX Code Method (Access with PBX Code)> Telephone Company CO Line CO Line 211-4567 TIE Line Network PBX-1 PBX-2 PBX Code 952 PBX Code 951 952-9-211-4567 TIE Line Interface Interface TRG 2 Outside Party Extn. 1011 Extn. 1011 (211-4567) Dials "7-952-9-211-4567"...
  • Page 220 1.13 P CO Line Call through Other PBXs—by the ARS feature [Example] <Extension Number Method (Access without PBX Code)> Telephone Company CO Line CO Line 211-4567 TIE Line Network PBX-2 PBX-1 9-211-4567 TIE Line Interface Interface TRG 2 Outside Party Extn.
  • Page 221 1.13 P <PBX Code Method (Access with PBX Code)> Telephone Company CO Line CO Line 211-4567 TIE Line Network PBX-1 PBX-2 PBX Code 952 PBX Code 951 952-9-211-4567 TIE Line Interface Interface TRG 2 Outside Party Extn. 1011 Extn. 1011 (211-4567) Dials "9-211-4567".
  • Page 222 1.13 P Blocking CO line calls made through another PBX and how to override it: Whether an incoming TIE line call can make a CO line call through this PBX (i.e., PBX-2), depends on the COS that is assigned to the trunk group of this PBX, that the incoming TIE line is connected to.
  • Page 223 1.13 P [Example] <Extension Number Method (Access Without PBX Code)> Telephone Company CO Line CO Line 211-4567 TRG 3 TIE Line Network of PBX-2 PBX-1 PBX-2 9-211-4567 TRG 1 (COS 3) of PBX-2 TIE Line Interface Interface TRG 2 of PBX-1 verification code entry feature no.
  • Page 224 1.13 P <PBX Code Method (Access with PBX Code)> Telephone Company CO Line CO Line 211-4567 TRG 3 TIE Line Network of PBX-2 PBX-1 PBX-2 PBX Code 951 PBX Code 952 952-9-211-4567 TRG 1 (COS 3) of PBX-2 TIE Line Interface Interface TRG 2...
  • Page 225 1.13 P FWD/Call Transfer/Intercept Routing to the CO Line [Example] Telephone Company Forwarded/Transferred/ Intercepted to 211-4567 CO Line CO Line TIE Line Network PBX-2 PBX-1 PBX Code 952 PBX Code 951 952-1011 TIE Line Interface Interface Outside Party Extn. 1011 Extn.
  • Page 226 1.13 P CO Line-to-TIE-to-CO Line Access An outside caller can be connected to an outside party through the TIE line by using the DISA feature. [Example] Telephone Company Telephone Company (area code: 222) (area code: 333) CO Line CO Line CO Line 123-4567 CO Line...
  • Page 227 1.13 P TIE Line Routing and Modification Table To Make a TIE Line Call The TIE Line Routing and Modification Table is referenced by the PBX to identify the CO line route when an extension user makes a TIE line call. It is necessary to make unified tables with all PBXs in the TIE line network.
  • Page 228 1.13 P [TIE Line Routing and Modification Table of PBX-1] Priority 1 Priority 2 Dial Modification Dial Modification Location Leading Removed Removed No. of Added No. No. of Added No. Digits Digits Explanation: Location 01: The hunt sequence by dialing [2XXX]: The 1st route—trunk group (TRG) 1 Sending no.
  • Page 229 1.13 P PBX Code Method (Access with PBX Code) → 2.9.8 [2-6-1] Numbering Plan—Main—Features—TIE Line Access → 2.16.1 [9-1] TIE Table—Own PBX Code TIE Line Network PBX-4 PBX-3 PBX Code 953 PBX Code 954 Extn. xxxx Extn. xxxx b-2nd) 953#-xxxx 954#-xxxx If you dial: TRG 2...
  • Page 230 1.13 P The hunt sequence by dialing [7+PBX Code 954+XXXX]: The 1st route — trunk group (TRG) 2 Sending no. to PBX-4: 954#–XXXX To Receive a TIE Line Call Extension Number Method (Access without PBX Code) [Example] A TIE line call is sent to PBX-2 from PBX-1. If the number sent from PBX-1 is an TIE Line Network extension number of PBX-2 (e.g., 2011), the...
  • Page 231 1.13 P PBX Code Method (Access with PBX Code) [Example] A TIE line call is sent to PBX-2 from PBX-1. If the number sent from PBX- TIE Line Network 1 has the PBX code of PBX-2 "952", PBX-4 PBX-3 PBX Code 953 PBX Code 954 the call will be received at the corresponding extension of PBX-2...
  • Page 232 1.13 P Conditions • A CO line which is used for a private network should be assigned "Private" as the networking type. (→ 1.9.10 INCOMING CALL FEATURES) • To establish a QSIG network (→ 1.13.18 PRIVATE NETWORK FEATURES—QSIG), each ISDN (QSIG) connection in a TIE line network must have the port on one PBX assigned as a master port, and the port on the other PBX assigned as a slave port.
  • Page 233 PC Programming Manual 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Network Numbering Plan—Trunk Property 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Trunk Property 2.9.4 [2-3] Timers & Counters—Miscellaneous—Incoming Call Inter-digit Timer—TIE 2.9.8 [2-6-1] Numbering Plan—Main—Features → Idle Line Access (Local Access) →...
  • Page 234: Private Network Features-centralized Voice Mail

    1.13 P [500] Trunk Group Number Feature Manual References 1.1.3 ARS (Automatic Route Selection) 1.3.8 Call Transfer 1.4.7 DISA (Direct Inward System Access) 1.6.4 Flexible Numbering/Fixed Numbering 1.6.6 FWD (Call Forwarding) 1.9.11 Intercept Routing 1.17.6 TRS (Toll Restriction) 2.1 Capacity of System Resources Operating Manual References 1.2.1 Making Calls 1.13.14 Private Network Features—Centralized Voice Mail...
  • Page 235 1.13 P Feature Remote VPS Local VPS Two-way Recording into the VPS VPS Data Control by the PBX Remote FWD Setting by the VM VM Menu Message clear on Check Out Voice message number display [CO Line Call Answered by the VPS, Transferred to Extension at Other PBX (Extension Number Method)] Outside Caller Telephone Company...
  • Page 236 1.13 P [CO Line Call to an Extension Not Answered, Forwarded to Mailbox (Extension Number Method)] Outside Caller Telephone Company TIE Line Network PBX-1 PBX-2 PBX-3 Private network PBX-4 PBX-5 PBX-6 PBX-7 PBX-8 Mailbox 201: Mailbox 101 "Hello. I am not at Extn.
  • Page 237 1.13 P PBX Code Method (MPR Software File Version 5.0000 or later) Telephone Company Outside Caller TIE Line Network PBX-1 (PBX PBX-2 (PBX Code: 20) Code: 30) PBX-3 Private network PBX-4 PBX-5 PBX-6 PBX-7 PBX-8 Mailbox 101 Mailbox 730102: "Hello. I am not at Mailbox 201 Extn.
  • Page 238 Programming References PC Programming Manual 2.8.32 [1-3] Option—New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX- TDA200/KX-TDA600 only) 2.16.1 [9-1] TIE Table—Centralized VM 2.16.2 [9-2] Network Data Transmission → Network MSW Data Transmission for Centralized VM Feature—Data Re-transmission : Repeat Counter →...
  • Page 239: Private Network Features-ndss (network Direct Station Selection)

    1.13 P 1.13.15 Private Network Features—NDSS (Network Direct Station Selection) Description When PBXs are networked using ISDN or IP-GW cards, it is possible to assign flexible buttons as Network Direct Station Selection (NDSS) buttons. These buttons are used to monitor the status of extensions connected to up to seven other PBXs in the network, and to make or transfer calls to those extensions with one touch, like normal DSS buttons.
  • Page 240 Each QSIG port of a PRI card that will be used to transmit extension status information must be set to do so through system programming. Even if a port is set to not transmit information, it will still receive information from other PBXs. → 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting—Networking Data Transfer Transmit...
  • Page 241 1.13 P [Example VoIP Network] PBX-1 PBX-2 Network ID 1 4001 NDSS 4001 NDSS Idle Idle IP Network Busy Busy PBX-3 PBX-4 Network ID 2 4001 Idle Busy Mixed Network When using the NDSS feature over a mixed network containing both VoIP portions and ISDN line portions, it is possible to set whether status information will be transferred between VoIP and ISDN cards within each PBX.
  • Page 242 1.13 P • The monitor PBX stops receiving status information for the selected extension. All NDSS buttons for that extension stop displaying status information. However, the related information is not deleted from the Network Monitor Extensions Table. Therefore, if an extension user at a monitor PBX subsequently goes off-hook and presses the NDSS button for that extension, monitoring will be reactivated.
  • Page 243 NDSS can not be used when two PBXs are networked using the TIE Line Call by Own PBX Extension Number feature (→ 1.13.13 PRIVATE NETWORK FEATURES). Programming References PC Programming Manual 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—CO Setting— Networking Data Transfer 2.9.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Manager 2.11.5 [4-1-4] Wired Extension—Flexible Button →...
  • Page 244: Private Network Features-network Icd Group

    Version must be installed in the PBX that will support virtual PSs. • The conditions for 1.9.4 ICD Group Features—Outside Destinations also apply to this feature. Programming References PC Programming Manual 2.9.17 [2-9] System Options—Option 4—Send CLIP of CO Caller to ISDN—when ICD Group with Cellular Phone (KX-TDA100/KX-TDA200/KX-TDA600 only) Feature Manual...
  • Page 245: Private Network Features-ps Roaming By Network Icd Group

    1.13 P PT Programming Manual None Feature Manual References 1.9.4 ICD Group Features—Outside Destinations 1.19.2 Virtual PS 1.13.17 Private Network Features—PS Roaming by Network ICD Group Description One PS can be registered to up to 4 PBXs in a private network, and a Network ICD group created for the PS at each PBX, with virtual PSs set to forward to the other PBXs in the network.
  • Page 246: Private Network Features-qsig

    1.13 P channel will be released immediately. Since the PS can only be set to In Range at a single PBX at one time, any other PBXs to which the call is transferred will refuse the call, releasing the VoIP or ISDN channels. Conditions •...
  • Page 247 1.13 P [Standard Service Table] Service Description & Reference Calling Line Identification Sends the caller's number to the QSIG network when making a call. Presentation (CLIP) → 1.13.21 Private Network Features—QSIG—CLIP/COLP (Calling/ Connected Line Identification Presentation) and CNIP/CONP (Calling/ Connected Name Identification Presentation) Connected Line Identification Sends the number of the answered party to the QSIG network when Presentation (COLP)
  • Page 248 1.13 P Service Description & Reference Connected Name Identification Prevents CONP being sent by the answered party. Restriction (CONR) → 1.13.21 Private Network Features—QSIG—CLIP/COLP (Calling/ Connected Line Identification Presentation) and CNIP/CONP (Calling/ Connected Name Identification Presentation) Call Forwarding (CF)—by QSIG Forwards a call to the QSIG network. →...
  • Page 249: Private Network Features-qsig-ccbs (completion Of Calls To Busy Subscriber)

    10 seconds. Programming References PC Programming Manual 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911 2.8.32 [1-3] Option—New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-...
  • Page 250 This feature can be enabled or disabled on each ISDN (QSIG) port of the PBX. Programming References PC Programming Manual 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911 2.8.32 [1-3] Option—New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-...
  • Page 251: Private Network Features-qsig-clip/colp

    1.13 P 1.13.21 Private Network Features—QSIG—CLIP/COLP (Calling/ Connected Line Identification Presentation) and CNIP/ CONP (Calling/Connected Name Identification Presentation) Description Calling Line Identification Presentation (CLIP) and Calling Name Identification Presentation (CNIP): The PBX can send a preprogrammed extension number and/or name to the QSIG network when an extension user makes a call.
  • Page 252 COLR button. A flexible button can be customized as the CLIR or COLR button. Programming References PC Programming Manual 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911 2.9.8 [2-6-1] Numbering Plan—Main—Features →...
  • Page 253: Private Network Features-qsig-ct (call Transfer)

    1.13 P 1.13.22 Private Network Features—QSIG—CT (Call Transfer) Description The PBX transfers the call to a destination extension in another PBX in the QSIG network. If the same trunk group is used for the incoming call and the transferred call, the following situation will be possible.
  • Page 254: Private Network Features-voip (voice Over Internet Protocol)

    1.13 P 2.8.14 [1-1] Slot—Port Property - PRI Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Supplementary Service—COLP, CLIR, COLR, CNIP, CONP, CNIR, CONR, CF (Rerouting), CT, CCBS, E911 2.8.19 [1-1] Slot—Card Property - IP Gateway—QSIG-CT 2.8.32 [1-3] Option—New Card Installation—ISDN Standard Mode for PRI23 Card (KX-TDA100/KX-...
  • Page 255 1.13 P For receiving a call: TIE line service programming [TIE Line Routing and Modification Table] Priority 1 Priority 2 Dial Modification Dial Modification Location Leading Removed Removed No. of Added No. No. of Added No. Digits Digits 2 (VoIP port) [Explanation] Calls to destinations with leading number "2"...
  • Page 256 1.13 P [Example] Telephone Company Telephone Company (area code: 222) (area code: 333) 1-333-123-1011 PBX-1 PBX-2 Private IP IP-GW IP-GW Extn .1011 Extn .1000 Network (333-123-1011) Dials PBX code: 30 PBX code: 20 "7-20-1011". The leading numbers of extensions accessed through the VoIP network are added as entries to the Quick Dialing table, in addition to being registered as Other PBX Extension Numbers, as shown below: [Programming Example] Number to dial to call an extension at another PBX using VoIP network:...
  • Page 257: Ps Connection

    1.13.24 PS Connection Description A Panasonic portable station (PS) can be used in place of a proprietary telephone (PT), providing wireless access to PBX features and call handling. Cell Stations (CSs) allow PSs to receive reception within a designated area.
  • Page 258 • A PS can only be assigned an extension number of 4 digits or less. [KX-TDA600] • When an EMEC card is installed, the total number of PSs that the PBX supports will increase.
  • Page 259: Ps Directory

    1.13 P 2.8 Connection of 2.4 GHz Portable Stations KX-TDA600 2.10 Connection of 2.4 GHz Portable Stations 2.11 Connection of DECT 6.0 Portable Stations 2.3.2 EMEC Card (KX-TDA6105) Programming References PC Programming Manual 2.8.31 [1-2] Portable Station PT Programming Manual...
  • Page 260: Ps Feature Buttons

    1.13 P 2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—Extension Name 2.11.10 [4-2-1] Portable Station—Extension Settings—Main—Extension Name PT Programming Manual [001] System Speed Dialing Number [002] System Speed Dialing Name [004] Extension Name 1.13.26 PS Feature Buttons Description Although a portable station (PS) does not feature as many buttons as a proprietary telephone (PT), a PS can be customized to give a PS user access to PBX features, just as the flexible buttons on a PT can be customized.
  • Page 261 1.13 P [Programming Example: PS Ring Group] PS Ring Group 1 PS Ring Group 2 PS Ring Group 3 Floating Extension No. Group Name Sales 1 Sales 2 Customer Service Incoming CO Line Caller ID Called Number Caller ID Information Display PS 1 PS 2 PS 3...
  • Page 262 The ICD group has one proprietary telephone (PT) member, as well as four (for KX-TDA50) or six (for KX- TDA100/KX-TDA200/KX-TDA600) PS members which are in range of two different CSs. When a call arrives, each CS uses both (for KX-TDA50) or all three (for KX-TDA100/KX-TDA200/KX-TDA600) of its channels to ring each of the member PSs within its range.
  • Page 263 • For KX-TDA100/KX-TDA200/KX-TDA600 only Although each CS has three channels (i.e., can handle three conversations at once), the PBX will ring calls for only two PS ring groups at a time. In other words, if two calls directed to two different PS ring groups are ringing, no other PS ring group calls will ring until one of the other ringing calls is answered.
  • Page 264: Pt Programming

    1.13 P 1.9.1 ICD GROUP FEATURES 2.1 Capacity of System Resources 1.13.28 PT Programming Description A proprietary telephone (PT) can be used to customize the settings of the PBX or of an extension, using the following programming features: Programming Authorized Description Example Type...
  • Page 265 1.13 P Programming References PC Programming Manual 2.9.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Programming Mode Level 2.18.1 [11-1] Main—Password → System Password - PT Programming—Prog ** : User Level → System Password - PT Programming—Prog *# : Administrator Level → Manager Password - PT Programming—Prog *1 PT Programming Manual 2.1 PT Programming [516] Programming Mode Limitation...
  • Page 266: Quick Dialing

    Quick Dialing numbers follow the flexible numbering plan. (→ 1.6.4 Flexible Numbering/Fixed Numbering) Installation Manual References KX-TDA50 2.5.6 MEC Card (KX-TDA5105) KX-TDA100/KX-TDA200 2.3.2 MEC Card (KX-TDA0105) KX-TDA600 2.3.2 EMEC Card (KX-TDA6105) Programming References PC Programming Manual 2.9.9 [2-6-2] Numbering Plan—Quick Dial PT Programming Manual None...
  • Page 267: Quick Setup

    Numbering Table (available while a dial tone is heard)] (→ 1.6.4 Flexible Numbering/Fixed Numbering). Extension From 101/from Determines the number from which default extension numbers Number 201 (for KX- begin. TDA50/KX- TDA100/KX- TDA200) or from 1001/from 2001 (for KX-TDA600) Feature Manual...
  • Page 268 1.14 Q Item Parameter Description Operator The feature number for Operator Call can be selected. Local Access 0/1/9 The feature number for Idle Line Access can be selected. Remote Remote Enter the complete telephone number of the PBX (including the Maintenance Maintenance Dial country code).
  • Page 269: Redial, Last Number

    [KX-TDA100/KX-TDA200/KX-TDA600] Automatic Redial If Last Number Redial is performed in hands-free mode and the called party is busy, the number will be automatically redialed a preprogrammed number of times.
  • Page 270: Ring Tone Pattern Selection

    TDA600 only) 2.9.8 [2-6-1] Numbering Plan—Main—Features—Redial 2.9.17 [2-9] System Options—Option 2 → Redial—Automatic Redial when No Answer (ISDN) (KX-TDA100/KX-TDA200/KX-TDA600 only) → Redial—Save Dial After Connection to Redial Memory → Redial—Call Log by Redial key 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 7—Outgoing Call Log Memory 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 7—Outgoing Call Log Memory...
  • Page 271 1.15 R [Ring Tone Pattern Table] The ring tone pattern table is categorized into three parts, each containing a specified number of pattern plans. The ring tone pattern table is categorized as follows: • Incoming CO Line Calls: each pattern plan can assign a ring tone pattern for each trunk group. →...
  • Page 272: Room Status Control

    1.15 R Feature Manual References 2.1 Capacity of System Resources Operating Manual References 3.1.4 Customizing the Buttons—To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button (Digital proprietary telephone only) 1.15.3 Room Status Control Description A proprietary telephone (PT) with a 6-line display designated as the hotel operator extension can be used to view and change the check-in and check-out status of guest rooms associated with extensions.
  • Page 273 1.15 R [Example Use: Check-in Mode] DSS button Room101 Rooms 101 and 103 are currently in Room102 check-in status. Room103 Room104 Check-in button Room105 Check-out button When in Room Status Control mode, the hotel operator's extension is treated as a busy extension, similar to when performing PT programming.
  • Page 274: Smdr (station Message Detail Recording)

    Memory for SMDR: A specified number of records (data) can be remembered by the PBX. When memory is full, the oldest data is overwritten by new data. With KX-TDA100/KX-TDA200/KX-TDA600, when an EMEC/MEC card is installed, the number of SMDR records that can be stored will increase.
  • Page 275 1.16 S Pattern A: 80-column text without call charge information Date Time Dial Number Ring Duration ACC Code (8 digits) (25) (10) 01/02/02 10:03AM 1200 <I>12345678901234567890 5'15 00:00'00 01/02/02 10:07AM 1200 <I> 0'05 00:01'05 9876543210 01/02/02 10:15AM 1200 1234567890123456 00:01'05 9876543210 01/02/02 10:30AM...
  • Page 276 1.16 S [Explanation] The following table explains the types of data logged by SMDR. Each description below refers to data indicated above by the numbers in the parentheses. Number in Data Description the Pattern Date Shows the date of the call. Time Shows the end time of a call as hour/minute/AM or PM.
  • Page 277 1.16 S Number in Data Description the Pattern Dial Number [CO Line Call] Outgoing CO Line Call Shows the dialed telephone number. Digits shown are as follows: 0 through 9, , # P: Pause F: External Feature Access (EFA) signal =: Host PBX Access code (→...
  • Page 278 1.16 S Number in Data Description the Pattern CD (Condition Shows other call information using the following codes: Code) TR: Transfer FW: Call Forwarding (FWD) to CO line D0: Call using Direct Inward System Access (DISA) or TIE line service RM: Remote maintenance (modem) (→...
  • Page 279 Controls whether the DID numbers, names, numbers and names, or nothing is shown. If "none" is selected, <D> will not be shown. → 2.18.1 [11-1] Main—SMDR Options—SMDR Options—DID Number & Name (KX-TDA100/KX-TDA200/KX-TDA600) Secret dialing Controls the display of secret dialing, when ARS dial above, is set to show ARS-modified numbers.
  • Page 280 1.16 S Skip Perforation: determines the number of lines to be skipped at the end of every page. → 2.18.1 [11-1] Main—SMDR—SMDR Format—Blank Footer Length (Number of Lines) → [803] SMDR Skip Perforation The page length should be at least four lines longer than the skip perforation length. Explanation: Page Length...
  • Page 281 Installation Manual References KX-TDA50 2.9.1 Connection of Peripherals KX-TDA100/KX-TDA200 2.10.1 Connection of Peripherals KX-TDA600 2.3.2 EMEC Card (KX-TDA6105) 2.13.1 Connection of Peripherals Programming References PC Programming Manual 2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Analog CO Call Duration Start 2.9.11 [2-7-1] Class of Service—COS Settings—CO &...
  • Page 282: Special Carrier Access Code

    1.16 S [803] SMDR Skip Perforation [804] SMDR Outgoing Call Printing [805] SMDR Incoming Call Printing Feature Manual References 1.3.8 Call Transfer 1.3.19 COS (Class of Service) 1.4.5 DID (Direct Inward Dialing) 1.4.7 DISA (Direct Inward System Access) 1.8.5 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX) 1.9.3 ICD Group Features—Log-in/Log-out 1.13.13 PRIVATE NETWORK FEATURES 2.1 Capacity of System Resources...
  • Page 283: Speed Dialing, Personal

    Installation Manual References KX-TDA50 2.5.6 MEC Card (KX-TDA5105) KX-TDA100/KX-TDA200 2.3.2 MEC Card (KX-TDA0105) KX-TDA600 2.3.2 EMEC Card (KX-TDA6105) Programming References PC Programming Manual 2.9.8 [2-6-1] Numbering Plan—Main—Features → System Speed Dialing / Personal Speed Dialing → Personal Speed Dialing - Programming 2.11.4 [4-1-3] Wired Extension—Speed Dial...
  • Page 284: Speed Dialing, System

    KX-TDA50: Each tenant can select to use either the original set of common System Speed Dialing numbers or the additional common set. – KX-TDA100/KX-TDA200/KX-TDA600: Each tenant can select to use either the original set of common System Speed Dialing numbers or the set of System Speed Dialing numbers designated specifically for that tenant.
  • Page 285: Svm (simplified Voice Message)

    A caller can leave a voice message after hearing the greeting message. For the KX-TDA50, an SVM2 card is required. For the KX-TDA100/KX-TDA200/KX-TDA600, an ESVM4 card on an OPB3 card is required. SVM2 Card Up to two SVM2 cards can be installed in the PBX. Each card is assigned a floating extension number (default: 591 for SVM card 1, and 592 for SVM card 2).
  • Page 286 1.16 S [Example] SVM Card 1: Floating Extension No. 591 (default) 2 CH Message Box for Message Box for Message Box for Message Box for Extn. 101 Extn. 102 Extn. 103 Extn. 210 SVM Card 2: Floating Extension No. 592 (default) 2 CH Message Box for Extn.
  • Page 287 1.16 S Recording Time with the SVM2 Recording Time with the ESVM4 Recording Quality Card Card High about 40 minutes about 20 minutes Middle about 60 minutes about 60 minutes (default) about 120 minutes about 120 minutes When an ESVM card is used for the OGM feature, the recording quality can be set separately (→ 1.12.2 OGM (Outgoing Message)).
  • Page 288 1.16 S In this example: If a call is received at extension 101 and cannot be answered: In day mode: the call will be redirected to extension 102. In lunch/break/night mode: the call will be redirected to the SVM/ESVM card, and a voice message will be recorded to the message box.
  • Page 289 • Hardware Requirement: KX-TDA50: An SVM2 card KX-TDA100/KX-TDA200/KX-TDA600: An OPB card and ESVM4 card • The maximum number of voice messages (not including greeting messages) that can be recorded for an extension can be set between 1 and 100 through system programming. (Default: 10) •...
  • Page 290 1.16 S • The voice messages for an extension will be cleared when the extension is checked out using the Hospitality feature (→ 1.8.4 HOSPITALITY FEATURES). However, greeting messages will not be cleared. • An extension is able to receive calls even while a voice message is being recorded in that extension's message box.
  • Page 291 Programming References PC Programming Manual 2.5.4 Tool—Simplified Voice Message—Delete All Recording 2.5.5 Tool—Simplified Voice Message—Check Current Usage 2.8.25 [1-1] Slot—Card Property - OPB3 (KX-TDA100/KX-TDA200/KX-TDA600 only)—SVM Feature 2.9.4 [2-3] Timers & Counters—Miscellaneous → SVM—Recording Time → SVM—Dial Tone Continuous Time 2.9.8 [2-6-1] Numbering Plan—Main—Features—Simplified Voice Message Access 2.10.1 [3-1-1] Trunk Group—TRG Settings—Tone Detection...
  • Page 292 1.16 S 1.20.1 Walking COS 2.1 Capacity of System Resources Operating Manual References 1.3.62 SVM (Simplified Voice Message) 3.1.2 Personal Programming Feature Manual...
  • Page 293: T1 Line Service

    A T1 line carries twenty-four 64 kbps-voice channels at 1.5 Mbps, and can be used as a public or private line. Voice is digitized by Pulse Code Modulation (PCM). This feature is only available for the KX-TDA100, KX-TDA200, and KX-TDA600. Channel Type [LCOT/GCOT/DID/TIE/OPX] The T1 card supports five different channel types to provide connection at minimum expense.
  • Page 294: Tafas (trunk Answer From Any Station)

    If a T1 line is used as a public line, the channel type depends on the contract with the telephone company. Programming References PC Programming Manual 2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only) 2.8.18 [1-1] Slot—Port Property - T1 Port—Connection Command (KX-TDA100/KX-TDA200/KX-TDA600 only) PT Programming Manual...
  • Page 295: Tenant Service

    Programming References PC Programming Manual 2.9.8 [2-6-1] Numbering Plan—Main—Features—TAFAS Answer 2.9.19 [2-11-1] Audio Gain—Paging/MOH → Paging—EPG 1 (External Pager 1) (KX-TDA100/KX-TDA200/KX-TDA600 only) → Paging—EPG 2 (External Pager 2) (KX-TDA100/KX-TDA200/KX-TDA600 only) → Paging—EPG (External Pager) (KX-TDA50 only) 2.12.2 [5-2] External Pager...
  • Page 296 1.17 T 1.2. Time Service Time modes are used by many PBX features to determine how they will function during different times of day (→ 1.17.5 Time Service). The start and end times of each time mode (day/lunch/ break/night) for each day of the week are programmed in a Time Table. Each Time Table has a number which corresponds to the tenant number of the tenant it serves.
  • Page 297 1.17 T Call Blocking Through Class of Service (COS) programming, it is possible to: Prevent extensions of one tenant from calling extensions of another tenant. (Tenant-to-Tenant Call Block) Limit the trunk groups which can be used by the extensions of each tenant. (External Call Block) 3.1.
  • Page 298 1.17 T Tenant 1 Tenant 3 Extension User Extension User Group 1 Group 5 Extn. 100 Extn. 101 Extn. 108 Extn. 109 Tenant 2 Extension User Extension User Group 2 Group 6 Extension User Group 3 Extn. 102 Extn. 103 Extn.
  • Page 299 1.17 T Trunk Trunk Trunk Trunk Trunk Trunk Group 1 Group 2 Group 3 Group 4 Group 5 Group 6 Tenant 1 Tenant 2 Tenant 3 Extension User Extension User Extension User Group 1 Group 3 Group 5 Extn. 100 Extn. 101 Extn.
  • Page 300: Timed Reminder

    1.17 T 2.15 [8] ARS 2.15.6 [8-5] Carrier—Authorization Code for Tenant 2.17.2 [10-2] DIL Table & Port Settings—DIL—Tenant Number 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only)—Tenant Number PT Programming Manual [001] System Speed Dialing Number [006] Operator Assignment [320] ARS Mode...
  • Page 301: Time Service

    1.17 T Programming References PC Programming Manual 2.9.4 [2-3] Timers & Counters—DISA / Door / Reminder / U. Conf → Timed Reminder—Repeat Counter → Timed Reminder—Interval Time → Timed Reminder—Alarm Ringing Duration 2.9.8 [2-6-1] Numbering Plan—Main—Features → Remote Timed Reminder (Remote Wakeup Call) →...
  • Page 302 1.17 T Time Mode Description Condition Switching Automatic The current time mode will switch The current time mode (day/lunch/break/ automatically to another time mode at night) and the switching mode the time programmed in the tenant's (automatic/manual) can be switched Time Table, and can be switched manually by an extension assigned as a manually by pressing the Time Service...
  • Page 303 1.17 T Note that in this example, the day mode (Day 2) resumes automatically when the break mode (Break 1) ends. [Visualization of Time Schedule for Other Tenants] Monday Tuesday 00:00 03:00 06:00 09:00 12:00 15:00 18:00 21:00 00:00 Time Table No. 2 Time Table No.
  • Page 304 1.17 T [Programming Example: DID Table] The DID Table can be programmed to direct calls to a different destination for each time mode based on the number dialed by the caller. Calls can, for example, be directed to an ICD group during the day mode, or to the Voice Mail (VM) service of a VPS during the lunch and night modes.
  • Page 305 1.17 T Day/Night/Lunch button Day/Night/Break button Day/Night/Lunch/Break button These buttons can be used to switch the current time mode: pressing the Day/Night button will toggle between the day and night modes, for example. Each Time Service button will display the current time mode using a different light pattern or color, as shown below.
  • Page 306: Trs (toll Restriction)

    1.17 T → Type → Parameter Selection (for Time Service) → Parameter Selection (for Time Service - Automatic/Manual) → Optional Parameter (Ringing Tone Type Number) (for Time Service) 2.11.13 [4-2-3] Portable Station—Flexible Button → Type → Parameter Selection (for Time Service) →...
  • Page 307 1.17 T A TRS check is applied each time a dialed number is sent to a CO line after an extension user goes off-hook and seizes a line. [Flowchart] An extension user tries to make a CO line call. Was the number dialed using System Speed Dialing? Is TRS Override by System Speed Dialing enabled?
  • Page 308 1.17 T Exception Code Tables Exception Code Tables are preprogrammed lists of leading digits or complete telephone numbers which are checked against every dialed number prohibited by a Denied Code Table. When a user dials a number prohibited by a Denied Code Table, it is compared to at least one Exception Code Table. If the dialed number matches an entry found in the applicable Exception Code Table, the call is permitted.
  • Page 309 1.17 T Restricted Allowed • International Calls • Countries where Clients are Located Level 2 • Cellular Phone Calls (Boss) • Long Distance Calls • Local Calls • International Calls • Boss's Cellular Phone Level 3 • Cellular Phone Calls •...
  • Page 310 1.17 T : → 2.14.5 [7-5] Miscellaneous—TRS Override by System Speed Dialing → [509] TRS Level for System Speed Dialing TRS Settings for Each Level Through system programming, it is possible to select a different method of TRS. With this method, each level has its own separate set of denied codes and exception codes, which are only applied to that level.
  • Page 311 1.17 T local calls. To set TRS as in the example above, it is necessary to program the Denied Code and Exception Code Tables as follows: Denied Code Tables Exception Code Tables Level 1 Not Programmable Not Programmable Leading number to deny Leading number for country to be Level 2 011xx...
  • Page 312 1.17 T Access Code is stored in the PBX Access Code is not Access Code Type Access Code is not stored in the PBX Access Code is dialed dialed Host PBX Access TRS ignores the code Number dialed is not a TRS checks the entire Code and checks the...
  • Page 313 1.17 T → Parameter Selection (for TRS Level Change) 2.11.10 [4-2-1] Portable Station—Extension Settings—Main—COS 2.11.13 [4-2-3] Portable Station—Flexible Button → Type → Parameter Selection (for TRS Level Change) 2.11.17 [4-3] DSS Console → Type → Parameter Selection (for TRS Level Change) 2.14.1 [7-1] Denied Code 2.14.2 [7-2] Exception Code 2.14.3 [7-3] Special Carrier...
  • Page 314: Upgrading The Software

    Main Processing (EMPR/MPR) software Operating system data area on either the EMPR card of the data KX-TDA600, the MPR card of the KX-TDA100/KX-TDA200, or the Main Board of the KX-TDA50. Default system programming data for each Country/area data area on the EMPR card, MPR card, or...
  • Page 315: Verification Code Entry

    1.19 V 1.19 V 1.19.1 Verification Code Entry Description An extension user can enter a verification code when calling from his own or any other extension, to change the Toll Restriction (TRS) level (→ 1.17.6 TRS (Toll Restriction)) or to identify the call for accounting and billing purposes.
  • Page 316: Virtual Ps

    1.19 V : → 2.13.3 [6-3] Verification Code—User Name → [121] Verification Code Name : → 2.13.3 [6-3] Verification Code—Verification Code PIN → [122] Verification Code Personal Identification Number (PIN) : → 2.13.3 [6-3] Verification Code—COS Number → [123] Verification Code COS Number →...
  • Page 317 1.19 V [Example] Telephone Company Outside Caller TIE Line Network PBX-1 PBX-2 TIE Line Dials "201" Virtual PS 1 Virtual PS 2 Extn. 201 Extn. 202 Fwd to outside Fwd to destination destination at other PBX The following features can be accessed using this method: Feature Description &...
  • Page 318: Voice Mail (vm) Group

    VM Group Type Type Description A group of SLT ports which use the Voice Mail DTMF Integration features. VM (DTMF) Group A maximum of 2 (for KX-TDA50/KX-TDA100/KX-TDA200) or 8 (for KX-TDA600) groups can be assigned. Feature Manual...
  • Page 319 A maximum of 4 ports (8 channels) of the VPS can form a group. VM (DPT) Group With the KX-TDA100/KX-TDA200/KX-TDA600: • A maximum of 2 (for KX-TDA100/200) or 8 (for KX-TDA600) KX-TVS/KX-TVP systems can be connected to the PBX. • A maximum of one VM (DPT) group per KX-TVS/KX-TVP can be assigned.
  • Page 320 1.19 V [Programming Example of Extension Port] DPT Property Slot Port Port Type Extn. No. Unit No. Port No. Type* VPS* VPS* VM (DPT) VM (DPT) Group 1 VM (DPT) S-Hybrid VM (DPT) VM (DPT) Group 2 S-Hybrid VM (DPT) Not assignable Not assignable Not assignable...
  • Page 321 All ports in a VM (DPT) group must be connected to either the same DLC card, or to the pre-installed Super Hybrid ports. [KX-TDA100/KX-TDA200/KX-TDA600] • All ports in a VM (DPT) group must be connected to a single DHLC or DLC card.
  • Page 322: Voice Mail Dpt (digital) Integration

    1.19.4 Voice Mail DPT (Digital) Integration Description A Panasonic VPS that supports DPT (Digital) Integration (e.g., the KX-TVP200) can be connected to this PBX in a tightly integrated fashion. DPT (Digital) Integration features can be used when the VPS is connected through DPT ports of the PBX.
  • Page 323 2.17.2 [10-2] DIL Table & Port Settings—DIL → Tenant Number → VM Trunk Group No. DID: the setting of each location number for DID (→ 1.4.5 DID (Direct Inward Dialing)) 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only) → Tenant Number → VM Trunk Group No. [Example] For DIL Calls: Each location number can have its VM trunk group number (message number) and tenant number.
  • Page 324 1.19 V Example of Trunk Group Assignment], a caller will hear a corresponding company greeting of the VPS. Time mode (day/lunch/break/night) of the preprogrammed tenant is applied to the DIL destination and company greeting number. [Example] For DID Calls: Each location number can have its VM trunk group number (message number) and tenant number. [DID Programming Example] DID Destination VM Trunk...
  • Page 325 1.19 V CO Line Call CO Line Call 123-4567 123-2468 Sends the following information: · VM Trunk Group: 1 · Time mode: Day Intercept Sends the following information: · VM Trunk Group: 2 · Time mode: Lunch Tenant 1 Tenant 2 (Company A) (Company B) (Floating Extn.
  • Page 326 1.19 V The Two-way Record button is used to record into one's own mailbox. The Two-way Transfer button is used to record into someone else's mailbox. Note Before recording a Two-way telephone conversation, you should inform the other party that the conversation will be recorded.
  • Page 327 2.12.1 [5-1] Doorphone—VM Trunk Group Number 2.17.2 [10-2] DIL Table & Port Settings—DIL → Tenant Number → VM Trunk Group No. 2.17.3 [10-3] DID Table (KX-TDA100/KX-TDA200/KX-TDA600 only) → Tenant Number → VM Trunk Group No. PT Programming Manual [201] Transfer Recall Time Feature Manual References 1.6.3 Flexible Buttons...
  • Page 328: Voice Mail Dtmf Integration

    When a caller reaches the VPS, the VPS greets and guides the caller to leave a voice message for a specified mailbox. [Example] The VPS sends the message to the caller, "Thank you for calling Panasonic. Please enter the mailbox number of the person you wish to leave your message for." ↓...
  • Page 329 1.19 V Automated Attendant (AA) Service Mode The VPS greets and guides the caller to the desired extension directly without operator assistance. VM → AA Service, AA → VM Service It is possible to switch the service mode assigned on the VPS port, from the VM service to AA service or vice versa.
  • Page 330 1.19 V Transmitted Command Parameter In AA Service Mode In VM Service Mode None (DTMF commands are not sent. Work with default of the VPS.) Intercept Routing to a Mailbox of the VPS The PBX sends a mailbox number of the corresponding extension to the VPS when a CO line call is intercepted from an extension to the VPS.
  • Page 331 1.19 V the call to the VM group and dial the mailbox number of the desired extension with the required command (after the VPS answers the call). Therefore the caller can leave a message without knowing the mailbox number. 2.11.5 [4-1-4] Wired Extension—Flexible Button →...
  • Page 332 1.19 V [Performance of Pressing the MESSAGE Button] Transmitted Command In AA Service Mode In VM Service Mode Switching to VM command + Listening message Listening message command ( H [H = Mailbox command No.]) (#6 + H [H = Mailbox No.]) [Example] Sent "#6"...
  • Page 333 → VM DTMF Status Signal—FWD to VM Busy Tone → VM DTMF Status Signal—FWD to Extension Ringback Tone [Example] An incoming call reaches the VPS. The VPS greets the caller: "Thank you for calling Panasonic. If you know the extension number of the person you wish… ". Transfer The caller dials the extension number (extn.
  • Page 334 1.19 V Mailbox No. → 2.11.1 [4-1-1] Wired Extension—Extension Settings—Option 1—Programmed Mailbox No. → 2.11.10 [4-2-1] Portable Station—Extension Settings—Option 1—Programmed Mailbox No. • The Inter-digit time for the DTMF command and for DTMF status signal is programmable. 2.10.21 [3-8-1] VM(DTMF) Group—System Settings →...
  • Page 335: Walking Cos

    1.20 W 1.20 W 1.20.1 Walking COS Description A user can enter his extension number and extension personal identification number (PIN) (→ 1.5.6 Extension PIN (Personal Identification Number)) at another extension, to make the following types of call using his Class of Service, including TRS level, overriding the other extension's Class of Service. •...
  • Page 336: Walking Extension

    1.20 W 2.11.10 [4-2-1] Portable Station—Extension Settings—Main—Extension PIN PT Programming Manual [005] Extension Personal Identification Number (PIN) Feature Manual References 1.3.19 COS (Class of Service) 1.4.7 DISA (Direct Inward System Access) Operating Manual References 1.3.72 Walking COS 1.20.2 Walking Extension Description It is possible for an extension user to trade extension settings with another extension.
  • Page 337: Whisper Ohca

    1.20 W Operating Manual References 1.3.73 Walking Extension 1.20.3 Whisper OHCA Description An extension user can speak to a busy extension through the handset. Conditions • Class of Service (COS) programming determines which extensions can use this feature. • This feature is available when the calling and called extension use one of the following telephones: –...
  • Page 338: Wireless Xdp Parallel Mode

    1.20 W 1.20.4 Wireless XDP Parallel Mode Description A portable station (PS) can be used in parallel with a wired telephone, i.e., a digital proprietary telephone (DPT), analog proprietary telephone (APT), or single line telephone (SLT), allowing an extension user to make or receive calls with either the wired telephone or the PS.
  • Page 339 1.20 W • When a PS in Wireless XDP Parallel mode is on a call, other extension users cannot perform the following features when they call this extension: – Executive Busy Override (→ 1.5.3 Executive Busy Override) – Whisper OHCA (→ 1.20.3 Whisper OHCA) •...
  • Page 340 1.20 W – Transfer Recall (→ 1.3.8 Call Transfer) – Hold Recall (→ 1.3.2 Call Hold) – Call Park Recall (→ 1.3.5 Call Park) Programming References PC Programming Manual 2.8.5 [1-1] Slot—Port Property - Extension Port—DPT Type—Type 2.8.31 [1-2] Portable Station—PS Registration and De-registration 2.9.8 [2-6-1] Numbering Plan—Main—Features—Wireless XDP Parallel Mode Set / Cancel 2.9.11 [2-7-1] Class of Service—COS Settings—Optional Device &...
  • Page 341: Appendix

    Section 2 Appendix Feature Manual...
  • Page 342: Capacity Of System Resources

    2.1 Capacity of System Resources Capacity of System Resources System Item KX-TDA50 KX-TDA100/ KX-TDA600 KX-TDA200 Absent Message—Extension 1 x 16 characters Absent Message—System 8 x 16 characters Call Park Zone Conference Each shelf: 3-8 parties 3-8 parties per conference (32 parties total)
  • Page 343 2.1 Capacity of System Resources Item KX-TDA50 KX-TDA100/ KX-TDA600 KX-TDA200 Hot Line 32 digits Personal Speed Dialing Without EMEC or MEC: 32 digits, 10 entries/extn. With EMEC or MEC: 32 digits, 100 entries/extn. Quick Dialing 4 digits, 80 entries (an...
  • Page 344: Voice Message

    2.1 Capacity of System Resources Item KX-TDA50/KX-TDA100/KX-TDA200 KX-TDA600 Leading Number Table 16 digits, 1000 entries Leading Number Exception Table 16 digits, 200 entries ARS Carrier Itemized Billing Code 10 digits Authorization Code for Tenant 16 digits Authorization Code for Trunk...
  • Page 345 2.1 Capacity of System Resources Networking Item KX-TDA50/KX-TDA100/KX-TDA200/KX-TDA600 TIE Line Routing and Modification Table 32 entries Leading Number 3 digits PBX Code 7 digits NDSS: Monitored PBXs NDSS: Registered Extensions for Monitor PBX Item KX-TDA50 KX-TDA100 KX-TDA200 KX-TDA600 PC Console...
  • Page 346: Exclusive Features Table

    2.2 Exclusive Features Table Exclusive Features Table The KX-TDA50, KX-TDA100/KX-TDA200, and KX-TDA600 support certain features only available for that PBX model. The table below lists the features that are available depending on the PBX model. KX-TDA100/ KX-TDA50 KX-TDA600 KX-TDA200 1.1.6 Automatic Fax Transfer 1.3.13 CLIP (Calling Line...
  • Page 347: Tones/ring Tones

    2.3 Tones/Ring Tones Tones/Ring Tones Tone Patterns (Default) Confirmation Tone 1 Confirmation Tone 2 Confirmation Tone 3 Confirmation Tone 4 Confirmation Tone 5 Dial Tone 1 Dial Tone 2 Dial Tone 3 Dial Tone 4 Busy Tone Reorder Tone Ringback Tone 1 Ringback Tone 2 DND Tone CO Line Call Limit...
  • Page 348 2.3 Tones/Ring Tones Tone Patterns (Default) 15 s Hold Alarm Tone Call Waiting Tone 1 Call Waiting Tone 2 Ring Tone Patterns (Default)* Single Double Triple S-Double Feature Manual...
  • Page 349: Revision History

    2.4 Revision History Revision History 2.4.1 KX-TDA600 PLMPR Software File Version 5.0xxx New Contents • 1.16.5 SVM (Simplified Voice Message) • 1.13.14 Private Network Features—Centralized Voice Mail PBX Code Method (MPR Software File Version 5.0000 or later) Changed Contents •...
  • Page 350: Kx-tda100/kx-tda200 Pmpr Software File Version 2.0xxx

    2.4 Revision History Changed Contents • 1.3.6 Call Pickup [Directed Call Pickup] • 1.5.7 Extension Port Configuration • 1.6.1 Fixed Buttons FLASH/RECALL • 1.9.2 ICD Group Features—Group Call Distribution [How the Group Call Waiting Feature Activates] • 1.10.1 LED Indication Light Pattern of the Message/Ringer Lamp Light Pattern of the Corresponding Extension Status Button •...
  • Page 351: Kx-tda100/kx-tda200 Pmpr Software File Version 3.0xxx

    2.4 Revision History • 1.3.21 CTI (Computer Telephony Integration) • 1.6.3 Flexible Buttons • 1.6.4 Flexible Numbering/Fixed Numbering • 1.15.1 Redial, Last Number • 1.16.1 SMDR (Station Message Detail Recording) • 1.17.4 Timed Reminder • 1.17.6 TRS (Toll Restriction) • 2.1 Capacity of System Resources KX-TDA0920 SD Memory Card for Software Upgrade to Enhanced Version-only Features...
  • Page 352 2.4 Revision History • 1.13.17 Private Network Features—PS Roaming by Network ICD Group • 1.13.23 Private Network Features—VoIP (Voice over Internet Protocol) Automatic Rerouting of VoIP Calls to Public CO Lines • 1.19.2 Virtual PS Changed Contents • 1.3.8 Call Transfer One-touch Transfer •...
  • Page 353: Kx-tda100/kx-tda200 Pmpr Software File Version 3.2xxx

    2.4 Revision History SD Memory Card required for some features only • 1.4.7 DISA (Direct Inward System Access) DISA Automatic Walking COS DISA Call Transfer from Outside Destination • 1.9.2 ICD Group Features—Group Call Distribution Automatic Call Distribution (ACD) • 1.9.4 ICD Group Features—Outside Destinations •...
  • Page 354: Kx-tda50 Psmpr Software File Version 1.1xxx

    2.4 Revision History • 1.4.7 DISA (Direct Inward System Access) • 1.6.3 Flexible Buttons • 1.9.11 Intercept Routing • 1.9.13 Intercom Call • 1.10.1 LED Indication • 1.10.2 Line Preference—Incoming • 1.10.3 Line Preference—Outgoing • 1.11.4 Music on Hold • 1.16.1 SMDR (Station Message Detail Recording) •...
  • Page 355: Kx-tda50 Psmpr Software File Version 2.0xxx

    2.4 Revision History 2.4.7 KX-TDA50 PSMPR Software File Version 2.0xxx New Contents • 1.5.8 External Relay • 1.5.9 External Sensor • 1.8.4 HOSPITALITY FEATURES • 1.11.1 Manager Features • 1.13.3 Password Security • 1.13.15 Private Network Features—NDSS (Network Direct Station Selection) Changed Contents •...
  • Page 356 2.4 Revision History • 1.4.7 DISA (Direct Inward System Access) DISA Automatic Walking COS DISA Call Transfer from Outside Destination • 1.9.2 ICD Group Features—Group Call Distribution Automatic Call Distribution (ACD) • 1.9.4 ICD Group Features—Outside Destinations • 1.13.13 PRIVATE NETWORK FEATURES TIE Line Call by Own PBX Extension Number •...
  • Page 357: Kx-tda50 Psmpr Software File Version 4.0xxx

    2.4 Revision History • 1.10.3 Line Preference—Outgoing • 1.13.15 Private Network Features—NDSS (Network Direct Station Selection) • 1.13.18 PRIVATE NETWORK FEATURES—QSIG • 1.13.28 PT Programming • 1.14.1 Quick Dialing • 2.1 Capacity of System Resources KX-TDA5920 SD Memory Card for Software Upgrade to Enhanced Version-only Features •...
  • Page 358 2.4 Revision History • 1.9.15 IP-PT (IP Proprietary Telephone) Changed Contents • 1.3.3 Call Log, Incoming • 1.3.21 CTI (Computer Telephony Integration) • 1.4.7 DISA (Direct Inward System Access) • 1.9.11 Intercept Routing • 1.11.4 Music on Hold • 1.13.13 PRIVATE NETWORK FEATURES Blocking CO line calls made through another PBX and how to override it TIE Line Call by Own PBX Extension Number •...
  • Page 359: Index

    Index Feature Manual...
  • Page 360 Index Call Transfer with Announcement Call Transfer without Announcement AA —> Automated Attendant 76, 329 Call Transfer—QSIG (CT—QSIG) Absent Message Call Transfer—Screened —> Call Transfer with Announcement Account Code Entry Call Transfer—Unscreened —> Call Transfer without Announcement Alarm Information, Local Call Waiting Caller ID (Visual Caller ID) Alternate Calling—Ring/Voice CALL WAITING FEATURES...
  • Page 361 Index CTI —> Computer Telephony Integration External Relay CT—QSIG —> Call Transfer—QSIG External Sensor EXtra Device Port (XDP) Data Line Security Delayed Ringing Fax Transfer, Automatic Denied Code Tables Feature Clear, Extension Dial Mode Selection Feature Highlights Dial Tone First Party Call Control Dial Tone Transfer Fixed Buttons Dialing Digit Restriction during Conversation...
  • Page 362 Index ICD Group —> Incoming Call Distribution Group 122, 132 NDSS —> Network Direct Station Selection Idle Extension Hunting Network Direct Station Selection (NDSS) Idle Extension Hunting Group 122, 151 Network ICD Group Idle Line Access (Local Access) No Line Preference 171, 172 Idle Line Preference Numbering, Flexible/Fixed...
  • Page 363 Index PS Directory SVM Log PS Feature Buttons System Speed Dialing PS Ring Group 123, 260 PS Roaming by Network ICD Group PT Programming T1 Line Service Pulse to Tone Conversion TAFAS —> Trunk Answer From Any Station Tenant Service Tenant-to-Tenant Call Block QSIG Terminate...
  • Page 364 Index XDP —> EXtra Device Port XDP, Digital XDP, Wireless Feature Manual...
  • Page 365 Index Feature Manual...
  • Page 366 Copyright: This material is copyrighted by Panasonic Communications Co., Ltd., and may be reproduced for internal use only. All other reproduction, in whole or in part, is prohibited without the written consent of Panasonic Communications Co., Ltd. © 2006 Panasonic Communications Co., Ltd. All Rights Reserved.

This manual is also suitable for:

Kx-tda200Kx-tda50Kx-tda100

Comments to this Manuals

Symbols: 0
Latest comments: