Section 700
issue 1 July 1990
ACCOUNT CODES/SMDR
Account
Code Station
Message Detail Recorder
(SMDR)
When a serial interface printer is connected to S-DBS, information
such as call dates
and times, numbers called, outside line numbers used, etcetera, can be printed for
each account by entering its code number.
Separate account numbers
can be assigned to different
clients for preparing bills.
Each account code
can be a maximum of ten digits. Enter
the code either before
dialing or during the call.
Before data can be sent from the S-DBS to the SMDR printer you must enter # 93 from
the attendant's telephone. This is a one-time operation.
The S-DBS will continue to
send data to the printer, even if the printer is disconnected.
To enter an Account
Code before dialing out
1.
Rick up the receiver
OR
Press ON/OFF key
2.
Press AUTO key OR (# 7 if using a DTMF SLT)
3.
Press #
4.
Key in the account code (up to 10 digits)
5.
Press #
6.
Press a line key
-
7.
__---
-... ~~ - -. .- ---- - ..-.
Key in the telephone number.