Set Verified Account Codes - Panasonic DBS576 Section 700 Technical Manual

Chapter 4. User Maintenance

Set Verified Account Codes

Description
(For a description of Verified Account Codes, see "Verified Account Codes" on page 123.)
You can enter up to 500 Verified Account codes. The System will store them in memory as valid
codes. Once the codes are entered here, a Toll Restriction Service (TRS) Class of Service (COS) can
be used with each code. You can then enter your code on someone else's phone to bypass the TRS
restrictions on that phone. (The TRS assigned to the Verified Account code will override the phone's
TRS.)
Operation
To set the Verified Account code:
1. If not already in User Maintenance mode, enter User Main-
tenance mode. (See "To enter User Maintenance mode:" on
page 79.)
2. At the 81 level, enter 04.
3. Press the HOLD key.
4. Press the HOLD key.
5. Enter the Verified Account table number (001-500).
6. Press the HOLD key.
7. Press the HOLD key.
8. Enter up to ten-digit Verified Account Code. (All Verified
Account Codes must be unique. If there is a matching entry
entered, the System will not accept the entry and will double
beep.)
Note: To clear an entry or existing data, press the FLASH
key.
9. Press the HOLD key.
10. Enter the TRS Class to be associated with the Verified
Account Code entry.
11. Press the HOLD key to store the entry.
92
Action
DBS 576 (USA), issued January 1999
Section 700 - Operation
Result
81-
User MAINT displays
8104-
Verified ACCD displays
Table Number displays
XXX-
Verified ACCD displays (where XXX
= account code table number)
0001 : AAAAAAAAAAA
XXX:Account Cod displays (where
AAAAAAAAAAA = current account
code and XXX = account code table
number)
0002 :X
XXX:TRS Class displays (where X =
TRS Class)
0001 :YYY displays (where YYY = the
next account code table number)
576-20-700